Wallpaper for printing Digi Fort on non-woven

 

Specifications

Basis: woven.

Density: 240 g/m² for textures: 15310, 15312, 15317. / 290 g/m² for textures: 15201, 15302, 15303,  15304, 15305, 15306, 15707, 15708, 15710.

Total density: 300 g/m² for textures: 15310, 15312, 15317. / 350 g/m² for textures: 15201, 15302, 15303,  15304, 15305, 15306, 15707, 15708, 15710.

Roll width: 130 cm.

Roll length: 50 m.

Plating: white.

Texture: 15310 Fine Plaster / 15312 Smooth / 15317 Canvas / 15201 Fine Smooth / 15302 Sand / 15303 Dust / 15304 Mellow / 15305 Canvas / 15306 Fine Canvas / 15707 Brush Stroke / 15708 Fine Plaster / 15710 Fresco.

Printing: solvent, ecosolvent, latex, UV inks.

Application: indoors.

Manufacture: Holland.

Application

White photo wall murals on non-woven with a special acrylic layer for inkjet printing. The Wallpaper print has smooth or structured surface, designed for digital solvent & UV printing. Wallpaper for printing will help to create bright individual design of any private or public interior, the original design of a trading hall, to style a restaurant or boutique hotel.

Wallpaper resistant to abrasion and environmentally friendly, have the certificate of fire resistance.

Installation of Wallpaper print on non-woven basis is similar to the installation of conventional vinyl Wallpaper, it is possible immediately after drying the print.

Use

With digital print on the Wallpaper, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing the photo with the finished image must be left in straightened condition on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The installation of Wallpaper on a paper basis is similar to installation of standard vinyl Wallpaper.

During installation use glue for heavy vinyl Wallpaper, Wallpaper impregnated with the adhesive for 10 minutes, after which you can apply them on pre-primed wall. The recommended way stickers Wallpaper – "lap" (2.5 - 5 cm), perhaps a sticker in the intersection of subject trimming the edges. When wallpapering overlap additionally promazyvaya bead (the edge of fabric) to complete bonding the abutting edges. To smooth cloth, use a roller or a rag of soft material. Prikatyvaet neat joints and smooth cloth without damaging the print layer (paint).

Close