UV-curing special varnishes Marabu series of UVLG, UVLB, UVLM and UVLS

 

Characteristics

Series
UVLG
UVLB
UVLM
UVLS
Structure
glossy
Braille
matt
structured
The degree of gloss
glossy
glossy
matt
matt
Curing
fast
fast
fast
fast
The power of the radiator
one emitter from 80-120 W/cm
two radiators 150-200 W/cm
one emitter from 80-120 W/cm
one emitter from 80-120 W/cm
The conveyor speed, m/min
15-35
15-20
15-25
15-25
Recommended mesh, neath/cm
150.27–185.27
32.70-40.80
120.31-150.34
120.31-150.34
Resistance to external influences
average
low
low
low
Chemical resistance
high
high
high
high
Resistance against abrasion
high
high
high
high
* the recommendations in the table are for guidance only and corresponds to our present knowledge and shall inform about our products and their technological applications.

Description

UV-curing special stencil varnishes for optical and tactile effects, as well as for protective varnishing.


Description of special varnishes Marabu                        Certificate


Application features:


UVLG

High-gloss printed UV varnishes for continuous or selective varnishing of screen and offset prints. All of them are characterized by their individual benefits and suitability for different applications.


UVLG 1 - universal varnish.

UVLG 5 - for the finishing of offset prints.

UVLG 6 - highly resistant, for the external environment.

UVLG 7 - relief varnish.

Sealable material: paper, cardboard and artificial materials.


UVLB

UV curing varnishes for printing font for blind (Braille). Both varnishes are characterized by a very high constant thickness of the lacquer layer and a very good contour clarity.


UVLB 1 - for rotary screen printing.

UVLB 2 - for flat screen printing.

Sealable material: paper, cardboard, self-adhesive PE, PP films (treated with corona discharge or pre-varnished), polyester PET films, self-adhesive PVC and paper films.


UVLM and UVLS

Three special UV varnishes with different degree of transparency and surface structure. All varnishes are characterized by individual advantages and suitability for different applications.


UVLM 2 - for offset prints decoration, milky matte.

UVLS 1 - is a large structure, transparent.

UVLS 2 - small structure, milk.

Printed material: polycarbonate, pre-treated polyester and PVC.


Storage

2 years at a temperature of + 15-25°C in a dark room and the original closed container . Protect from cold and direct sunlight.

Close