Universal semi-automatic flatbed machine with vertical travel of table



Type of drive Pneumo
Number of printing units, units 1
Number of printed tables, pieces 1
Max. print size, mm 200 х 300
Max. size of the printed frame, mm 300 х 450
Table size, mm 200 х 300
Maximum height, mm to 300
Speed, pcs./hour to 1200
Operating pressure, bar 4-6
Compressed air consumption, l./min. 18
Power supply, V 220
Dimensions (LxWxH), mm 870x760x1250
Weight, kg 185


The machine can be optionally supplied

Vacuum table
Equipment for printing on cylindrical surfaces
Equipment for printing on oval surfaces


Universal semi-automatic flatbed machine with vertical travel of working table (for screen printing) screen printing is designed for single color and multicolor graphic print on a flat, hard objects such as cardboard, wood, glass, metal, plastic, etc. in the manufacture should snap this flatbed machine capable of printing on textiles such as wallets, textile packaging, housekeeper, briefcases, bags, socks, gloves and m. etc. Well established in those products that have small overall dimensions, but have a greater height at which a conventional flatbed machines because of their technical features print can't.

This flatbed machine can be optionally equipped with a vacuum table which will allow you to fix the material during the printing cycle, allowing you to firmly hold on the surface is quite heavy and small-sized products.

Equipment for printing on cylindrical surfaces - designed for single color and multicolor printing on cylindrical objects with a small angle taper (mugs, glasses, ashtrays, bottles, buckets, bottles, automotive pistons, etc. (piece holders not included).

Equipment for printing on oval surfaces - designed for monochrome and multicolor printing oval objects (designer mugs, glasses, oval plates, etc. (piece holders not included).

Semi-automatic machine for screen printing standard issue:

• Pneumoperitoneum for precise vertical lifting and lowering of the printing table, parallel to the printed frame.

• Mechanical adjustment of the printing gap. With the help of which you can adjust the distance of the lift table with respect to the printing frame that allows to seal the material with thickness up to 300 mm.

• Controls: on, off, control of movement and speed control of printing, print completion, setting up different print programs and programming sequences of work, monitoring of the printing process, manual and automatic print cycle, etc.

• Side clamps, which are equipped with rigid holders screw fixing the printing frame. Holders securely hold the frame, eliminating in the process of printing its displacement and mobility, as well as to prevent re-alignment.

• Micrometer register, which allows to align the position of the table in all directions with respect to the stencil plate.

• Pneumatic system with separate adjustment of the contact pressure of the squeegee and forrakelya. To ensure high precision and stability of pressure during the printing process, as well as the flawless repetition of kreschatyska throughout the printing cycle.

• Independent mechanical adjustments and tilt the squeegee forrakelya, used to adjust the flow amount of ink transferred from the printing form on the printing surface.

• Pneumatic system to adjust the speed of movement of the squeegee and forrakelya.

• By adjusting the stroke length of the squeegee and forrakelya.



Для содержимого этой страницы требуется более новая версия Adobe Flash Player.

Получить проигрыватель Adobe Flash Player