Paint for screen printing UV-curable Ultrastar UVS
 |
 |
Screen UV-paint for PVC, self-adhesive films of polyethylene and polypropylene, hard and soft PVC, polyester and adhesive films, paper and various types of cardboard.
Ultrastar UVS is a versatile and highly resistant screen printing ink with UV curing, suitable for printing on the following materials: self-adhesive PVC films or PVC adhesive films, self-adhesive polyethylene (PE) and polypropylene (PP) films, pre-treated with corona discharge or sealed varnish, hard and soft PVC, pre-treated polyester films, paper, cardboard of various densities.
Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Ultrastar UVS.
Application features |
elastic paint layer / compatible with hot stamping foil / high chemical resistance against various fillers / mechanical abrasion resistance / high resistance to external influences |
Type (paint) |
uv-curable screen printing ink |
Drying speed |
fast |
The degree of gloss |
glossy |
Covering capacity |
average |
Resistance to external environment |
high |
Application |
silk screen printing / uv printing |
Printed materials |
paper / cardboard / hard and soft pvc / self-adhesive film pvc / treated polypropylene (pp) / treated polyethylene (pe) / polyester film, primer |
Manufacturer |
Marabu (Germany) |
Detailed description paints Marabu Ultrastar UVS
Color layout
UVS 922
Glossy
Volume of 1kg.
UVS 924
Glossy
Volume of 1kg.
UVS 926
Glossy
Volume of 1kg.
UVS 932
Glossy
Volume of 1kg.
UVS 934
Glossy
Volume of 1kg.
UVS 936
Glossy
Volume of 1kg.
UVS 950
Glossy
Volume of 1kg.
UVS 952
Glossy
Volume of 1kg.
UVS 956
Glossy
Volume of 1kg.
UVS 960
Glossy
Volume of 1kg.
UVS 962
Glossy
Volume of 1kg.
UVS 970
Glossy
Volume of 1kg.
UVS 980
Glossy
Volume of 1kg.
UVS 170
Glossy
Volume of 1kg.
UVS 180
Glossy
Volume of 1kg.
Further shades
UVS 904
Glossy
Volume of 1kg.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
 |
Thinner UVV 2 UVV2 - thinner is added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading. Additive - 1-10% Unit of measure: 1l. |
 |
UV accelerator UV-B1 UV-B1 - uv accelerator, used to accelerate the reaction of curing paint and possible improvement of adhesion to the substrate based on improved deep curing. Additive - 1-2% Unit of measure: 0,1l. |
 |
UV accelerator UV-B2 UV-B2 - uv accelerator, increases the curing speed, increases the hardness of the paint layer and gloss. Additive - 1-4% Unit of measure: 0,1l. |
 |
Adhesion modifier UV-HV1 UV-HV1 - adhesion modifier, improves the adhesion of the paint layer with coated paper, cardboard (eg, Choromolux), metals. The modifier is not intended as an additive for printing on artificial materials. The mixture is unstable during storage, so it should be consumed within 2-4 hours. Additive - 0,5-2% Unit of measure: 0,1l. |
 |
Adhesion modifier UV-HV4 UV-HV4 is an adhesion modifier, improves adhesion of the paint layer to complex substrates or is used in overprinting when the paint layer hardens strongly. The mixture is unstable during storage, so it should be consumed within 2-4 hours. Additive - 0,5-4% Unit of measure: 0,1l. |
 |
Means for spreading UV-VM UV-VM - means for spreading, is used to eliminate violations of paint spreading, which may occur due to residues of dirt on the printed surface of the substrate or improper adjustment of the printing machine. Additive - 0,5-1,5% Unit of measure: 0,1l. |
 |
Thixotropic agent STM STM - thixotropic agent, serves to increase the hiding power of the paint. It is used, for example, when printing thin lines in the positive and negative printing area, with relief printing. Not applicable where high flexibility of the paint layer, deep drawing is required. Additive - 0,5-2% Unit of measure: 1l. and 5l. |
 |
UR3/ UR4 cleaner UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint. Unit of measure: 5l. |
Metallics are mixed with lacquer UVS 904, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.
 |
Metallic powders Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the larger size of solid particles in metal powders should choose a coarser mesh, for example, 100.40. Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish UVS 904. |
S 181
Silver
Additive 17%
Volume of 1 kg.
S 182
Gold
Additive 20%
Volume of 1 kg.
S 183
Gold
Additive 20%
Volume of 1 kg.
S 184
Gold
Additive 20%
Volume of 1 kg.
S 186
Copper
Additive 25%
Volume of 1 kg.
S 190
Silver
Additive 17%
Volume of 1 kg.
 |
Metallic pastes Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. To print mixtures with pasta-Metallica we recommend you to use a finer mesh, for example, to 150.31 140.31. |
S 191
Silver
Additive 15-25%
Volume of 0.2 kg.
S 192
Gold
Additive 15-25%
Volume of 0.2 kg.
S 193
Gold
Additive 15-25%
Volume of 0.2 kg.
 |
Metallized pastes for paints based on UV curing High-gloss metallized pastes are used to create metallic shades by mixing them into transparent varnishes and bases. For printing, we recommend using grids, for example, from 140.31 to 150.31. |
S-UV 191
Silver
Additive 15-25%
Volume of 0.2 kg.
S-UV 192
Gold
Additive 15-25%
Volume of 0.2 kg.
S-UV 193
Gold
Additive 15-25%
Volume of 0.2 kg.
S-UV 291
Silver
Additive 10-25%
Volume of 0.2 kg.
S-UV 293
Gold
Additive 10-25%
Volume of 0.2 kg.
S-UV 296
Silver
Additive 10-12,5%
Volume of 0.1 kg.
S-UV 297
Gold
Additive 10-12,5%
Volume of 0.1 kg.
S-UV 298
Gold
Additive 10-12,5%
Volume of 0.1 kg.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
