Paint for screen printing UV-curable Ultrastar-M UVSM

 

 

 


Matte and highly resistant UV screen printing ink, which is suitable for the following materials: self-adhesive PVC and hard PVC films, SELF-adhesive PE and PP films, varnished or corona treated, polystyrene, treated, polyester films, lacquered and powder coated surfaces, glass (interior decoration without moisture access), paper and various types of cardboard.

Ultrastar-M UVSM is a fast-curing screen UV paint, with good hiding power, good resistance to chemicals, with the possibility of a variety of applications in graphic and industrial printing, especially it should be noted good adhesion to polystyrene.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Ultrastar-M UVSM.


Application features

matte paint / high chemical and mechanical resistance / high hiding power

Type (paint)

uv-curable screen printing ink

Drying speed

fast

The degree of gloss

matt

Covering capacity

high

Resistance to external environment

average

Application

silk screen printing / uv printing

Printed materials

paper / cardboard / rigid pvc / ABS and SAN plastic / pvc self-adhesive film / treated polypropylene (pp) / treated polyethylene (pe) / polycarbonate (pc) / polystyrene (ps)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Ultrastar-M UVSM                        Color layout



UVSM 922
UV curing paint  UVSM 922
Matte
Volume of 5kg.

UVSM 924
UV curing paint  UVSM 924
Matte
Volume of 5kg.

UVSM 926
UV curing paint  UVSM 926
Matte
Volume of 5kg.

UVSM 932
UV curing paint  UVSM 932
Matte
Volume of 5kg.

UVSM 934
UV curing paint  UVSM 934
Matte
Volume of 5kg.

UVSM 936
UV curing paint  UVSM 936
Matte
Volume of 5kg.

UVSM 950
UV curing paint  UVSM 950
Matte
Volume of 5kg.

UVSM 952
UV curing paint  UVSM 952
Matte
Volume of 5kg.

UVSM 956
UV curing paint  UVSM 956
Matte
Volume of 5kg.


UVSM 960
UV curing paint  UVSM 960
Matte
Volume of 5kg.

UVSM 962
UV curing paint  UVSM 962
Matte
Volume of 5kg.

UVSM 970
UV curing paint  UVSM 970
Matte
Volume of 5kg.

UVSM 980
UV curing paint  UVSM 980
Matte
Volume of 5kg.

UVSM 180
UV curing paint  UVSM 180
Matte
Volume of 5kg.

UVSM 181
UV curing paint  UVSM 181
Matte
Volume of 5kg.



Further shades


UVSM 409
UV curing paint  UVSM 409
Matte
Volume of 5kg.

UVSM 904
UV curing paint  UVSM 904
Matte
Volume of 5kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner UVV 2

UVV2 - thinner is added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 1-10%

Unit of measure: 1l.

UV accelerator UV-B1

UV-B1 - uv accelerator, used to accelerate the reaction of curing paint and possible improvement of adhesion to the substrate based on improved deep curing.

Additive - 1-2%

Unit of measure: 0,1l.

Adhesion modifier UV-HV4

UV-HV4 is an adhesion modifier, improves adhesion of the paint layer to complex substrates or is used in overprinting when the paint layer hardens strongly. The mixture is unstable during storage, so it should be consumed within 2-4 hours.

Additive - 0,5-4%

Unit of measure: 0,1l.

Means for spreading UV-VM

UV-VM - means for spreading, is used to eliminate violations of paint spreading, which may occur due to residues of dirt on the printed surface of the substrate or improper adjustment of the printing machine.

Additive - 0,5-1,5%

Unit of measure: 0,1l.

Hardener H1

H1 - hardener, added to give the paint layer better stability and adhesion. The hardener should be thoroughly and evenly mixed in the paint. The mixture of paint and hardener is unstable and must be recycled within 8 hours.

Additive - 2%

Unit of measure: 0,1l. and 0,2l.

Thixotropic agent STM

STM - thixotropic agent, serves to increase the hiding power of the paint. It is used, for example, when printing thin lines in the positive and negative printing area, with relief printing. Not applicable where high flexibility of the paint layer, deep drawing is required.

Additive - 0,5-2%

Unit of measure: 1l. and 5l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. Metallics are mixed with uvsm 904 varnish, and the recommended amount of additive can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in such an amount that can be processed during the time of the bowl.


Metallic pastes

Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. To print mixtures with pasta-Metallica we recommend you to use a finer mesh, for example, to 150.31 140.31.


S 191
Metallized paste S 191
Silver
Additive 15-25%
Volume of 0.2 kg.

S 192
Metallized paste S 192
Gold
Additive 15-25%
Volume of 0.2 kg.

S 193
Metallized paste S 193
Gold
Additive 15-25%
Volume of 0.2 kg.

 

Metallized pastes for paints based on UV curing

High-gloss metallized pastes are used to create metallic shades by mixing them into transparent varnishes and bases. For printing, we recommend using grids, for example, from 140.31 to 150.31.


S-UV 191
Metallized paste S-UV 191
Silver
Additive 15-25%
Volume of 0.2 kg.

S-UV 192
Metallized paste S-UV 192
Gold
Additive 15-25%
Volume of 0.2 kg.

S-UV 193
Metallized paste S-UV 193
Gold
Additive 15-25%
Volume of 0.2 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close