Paint for screen printing UV-curable Ultrapack UVC
 |
 |
UV screen printing ink for printing on pre-treated polyethylene and polypropylene, PET, PETG, rigid PVC, polycarbonate, polystyrene.
Ultrapack UVC was specifically designed in accordance with the requirements for direct printing on packaging and housing products. It can be used when printing on monochrome and multi-color settings with a print speed of up to 7000 bottles per hour. Thus, UVC is ideal for printing on bottles, banks, tubes, beakers, and cartridges.
Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Ultrapack UVC.
Application features |
universal application in UV printing / very good resistance to water, water vapor and fillers / great performance due to high printing speeds / very good structural viscosity very elastic white for printing on tubes |
Type (paint) |
uv-curable screen printing ink |
Drying speed |
fast |
The degree of gloss |
glossy |
Covering capacity |
high |
Resistance to external environment |
average |
Application |
silk screen printing / uv printing |
Printed materials |
rigid pvc / polystyrene (ps) / polycarbonate (pc) / processed polypropylene (pp) / processed polyethylene (pe) / polyamide (pa) / polyester (petg, peta) / self-adhesive film pvc |
Manufacturer |
Marabu (Germany) |
Detailed description paints Marabu Ultrapack UVC
Color layout
UVC 922
Glossy
Volume of 1kg.
UVC 924
Glossy
Volume of 1kg.
UVC 926
Glossy
Volume of 1kg.
UVC 932
Glossy
Volume of 1kg.
UVC 934
Glossy
Volume of 1kg.
UVC 936
Glossy
Volume of 1kg.
UVC 950
Glossy
Volume of 1kg.
UVC 952
Glossy
Volume of 1kg.
UVC 956
Glossy
Volume of 1kg.
UVC 960
Glossy
Volume of 1kg.
UVC 962
Glossy
Volume of 1kg.
UVC 970
Glossy
Volume of 1kg.
UVC 980
Glossy
Volume of 1kg.
UVC 188
Glossy
Volume of 1kg.
UVC 270
Glossy
Volume of 1kg.
4-colour process shades
UVC 425
Glossy
Volume of 1kg.
UVC 435
Glossy
Volume of 1kg.
UVC 455
Glossy
Volume of 1kg.
UVC 485
Glossy
Volume of 1kg.
High-opaque shades
UVC 122
Glossy
Volume of 1kg.
UVC 132
Glossy
Volume of 1kg.
UVC 152
Glossy
Volume of 1kg.
UVC 162
Glossy
Volume of 1kg.
UVC 170
Glossy
Volume of 1kg.
UVC 171
Glossy
Volume of 1kg.
UVC 180
Glossy
Volume of 1kg.
Further shades
UVC 409
Glossy
Volume of 1kg.
UVC 904
Glossy
Volume of 1kg.
UVC 910
Glossy
Volume of 1kg.
IFT Varnish
Glossy
Volume of 1kg.
UVC 914
Glossy
Volume of 1kg.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
 |
Thinner UVV1 UVV1 - thinner is added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading. Additive - 1-10% Unit of measure: 1l. |
 |
The reactive thinner UVV3 UVV3-reactive thinner is added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading. Additive - 1-10% Unit of measure: 1l. |
 |
UV accelerator UV-B1 UV-B1 - uv accelerator, used to accelerate the reaction of curing paint and possible improvement of adhesion to the substrate based on improved deep curing. Additive - 0,5-2% Unit of measure: 0,1l. |
 |
UV accelerator UV-B5 UV-B5 - UV accelerator used to accelerate the surface curing reaction. Additive - 0,5-1,5% Unit of measure: 0,1l. |
 |
Means for spreading UV-VM UV-VM - means for spreading, is used to eliminate violations of paint spreading, which may occur due to residues of dirt on the printed surface of the substrate or improper adjustment of the printing machine. Additive - 0,5-1,5% Unit of measure: 0,1l. |
 |
Hardener H3 H3 - hardener, added to give the paint layer better stability and adhesion. The hardener should be thoroughly and evenly mixed in the paint. This mixture is not suitable for long-term storage and therefore should be used during the time of the bowl. Additive - 2-4% Unit of measure: 0,2l. |
 |
Thixotropic agent STM STM - thixotropic agent, serves to increase the hiding power of the paint. It is used, for example, when printing thin lines in the positive and negative printing area, with relief printing. Not applicable where high flexibility of the paint layer, deep drawing is required. Additive - 0,5-2% Unit of measure: 1l. and 5l. |
 |
UR3/ UR4 cleaner UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint. Unit of measure: 5l. |
Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. Metallics are mixed with UVC 904 varnish, and the recommended amount of additive can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in such an amount that can be processed during the time of the bowl.
 |
Metallized pastes for paints based on UV curing High-gloss metallized pastes are used to create metallic shades by mixing them into transparent varnishes and bases. For printing, we recommend using grids, for example, from 140.31 to 150.31. |
S-UV 191
Silver
Additive 15-25%
Volume of 0.2 kg.
S-UV 192
Gold
Additive 15-25%
Volume of 0.2 kg.
S-UV 193
Gold
Additive 15-25%
Volume of 0.2 kg.
S-UV 291
Silver
Additive 10-25%
Volume of 0.2 kg.
S-UV 293
Gold
Additive 10-25%
Volume of 0.2 kg.
S-UV 296
Silver
Additive 10-12,5%
Volume of 0.1 kg.
S-UV 297
Gold
Additive 10-12,5%
Volume of 0.1 kg.
S-UV 298
Gold
Additive 10-12,5%
Volume of 0.1 kg.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
