Stencil aluminum frames for screen printing and services for the production of printing forms

 

Ltd. "Reklamnaya sreda" produces high quality professional aluminum frames for silk screen printing. The use of a special profile in the production ensures high stability during printing, as well as providing quality flexural strength and ease of use.

Stencil aluminum frames are made of aluminum profiles, square or rectangular.

The surface of the screen frame to which the bonding grid has a special sand blasting for tighter grip adhesive mesh. With strict compliance process for bonding grid, screen frame sandblasted reduce the risk of "slipping" the grid to a minimum.

Hermetic welds are not allowed to penetrate the water and chemicals inside the frame.

Help in the selection of thickness and height of the profile based on the external dimensions of the frame and the tension force. After that, be sure that the screen frame is highly resistant to bending and twisting forces of tension grid, and will retain its parallelism.

Selection of quality screen frame provide high-quality prints for the duration of its operation.

 

Dimensions of finished aluminum frames


External size, mm Inner size, mm Profile size, mm
360 х 460 300 х 400 20*30*1
460 х 560 400 х 500 20*30*1
500 х 610 430 х 540 35*35*1.6
586 х 686 500 х 600 28*43*1,4
584 х 786 508 х 710 38*38*1,8
676 х 776 600 х 700 38*38*1,4
776 х 876 700 х 800 38*38*1,4
700 х 900 624 х 824 38*38*2
1000 х 1000 924 х 924 38*38*2

 

Self-tensioning aluminum frames for screen printing

 

 

 

External size, mm Inner size, mm Profile diameter, mm
584 х 794 510 х 720 37
832 х 1062 750 х 980 41

 

Production of aluminum frames for screen printing

Ltd. "Reklamnaya sreda" offers its services for the production of aluminum frames for screen printing forms.

We produce different frame formats to your order for all kinds of printing equipment.

We produce frames for TPF under your size within 2-4 working days. For the production of frames for printed forms we use materials well-known manufacturers to meet technological standards in order to achieve the best results.

Note: the maximum frame size we can manufacture shall not exceed 1800х4000 mm.

 

Services tension screen mesh , exhibiting , recovery and purification of stencil for screen printing forms

Ltd. "Reklamnaya sreda" takes orders for screen printing forms for printing on various materials.

 Production stencil plate includes: 

  • manufacturing aluminum frames for screen printing in a wide range of sizes as well as in the field of applications,  
  • service for stretch mesh for screen printing forms (frames),  
  • service for coating or capillary film and further fotoeksponirovanie,  
  • services regeneration (old emulsion remover with mesh screen), as well as the removal of double images (phantoms),  
  • services cleaning screen frame from paint residues,   
  • development of design layouts, imagesetter films.
  • Note: the maximum frame size that we can pull the screen grid must not exceed 1800х4000 mm.

    Note: the maximum frame size that we might exhibit should not exceed 1300х1700 mm.

    Note: the maximum size of the imagesetter that we can withdraw must not exceed 900х1120 mm.

    Admission Rules stencil frames the work.

    Stencil frames taken in the work in its purest form: not paint residues or other contaminants. In the event that the work shall be polluted frame, we reserve the right to invoice for cleaning services for frames. Together with the frames to be transmitted and ready imagesetter, if you order an exposure.

      Stencil frames will not be accepted in the work. 

    Wooden frames, frames with apparent defects in its entirety, twisted frame (not observed flatness of the sides of the frame), the frame with a tight mesh regeneration and exhibition with pronounced gaps and defects grid fiber imagesetter made ??on tracing paper.

    Close