Paint pad printing with solvent Tampaplus TPL
 |
 |
 |
Ink for pad printing Tampaplus TPL is used for printing on ABS and SAN-plastic, polystyrene, rigid PVC, polycarbonate, acrylic glass and lacquered surfaces.
The addition of the hardener H1 or H2 paint Tampaplus TPL demonstrates excellent adhesion to printed materials such as lacquered surfaces, thin-layer anodized aluminum or various duroplasty.
Glossy and quick-drying Tampaplus TPL characterized by a very good behavior in printing on machines with a closed system, so paint is perfect for printing high-quality packaging, for example, in the cosmetic industry, buildings, products, industrial goods, have to meet high demands on sustainability as well as different kinds of Souvenirs.
Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Tampaplus TPL.
Application features |
universally applicable / quick-drying / high resistance against alcohol and gasoline / ideal for industrial pad printing |
Type (paint) |
solvent-based 1 or 2 component pad printing ink |
Drying speed |
fast |
The degree of gloss |
glossy |
Covering capacity |
high |
Resistance to external environment |
high |
Application |
pad printing / sporting goods / toys / automotive components / cosmetic packaging / advertising and office materials / souvenirs |
Printed materials |
wood / paper / cardboard / anodized aluminum / polystyrene (ps) / polycarbonate (pc) / acrylic glass (pmma) / hard pvc / duroplasts / lacquered surfaces / ABS and SAN plastics |
Manufacturer |
Marabu (Germany) |
Detailed description paints Marabu Tampaplus TPL
Color layout
TPL 920
Glossy
Volume of 1l.
TPL 922
Glossy
Volume of 1l.
TPL 924
Glossy
Volume of 1l.
TPL 926
Glossy
Volume of 1l.
TPL 930
Glossy
Volume of 1l.
TPL 932
Glossy
Volume of 1l.
TPL 934
Glossy
Volume of 1l.
TPL 936
Glossy
Volume of 1l.
TPL 940
Glossy
Volume of 1l.
TPL 950
Glossy
Volume of 1l.
TPL 952
Glossy
Volume of 1l.
TPL 954
Glossy
Volume of 1l.
TPL 956
Glossy
Volume of 1l.
TPL 960
Glossy
Volume of 1l.
TPL 962
Glossy
Volume of 1l.
TPL 970
Glossy
Volume of 1l.
TPL 980
Glossy
Volume of 1l.
TPL 270
Glossy
Volume of 1l.
4-colour process shades
TPL 429
Glossy
Volume of 1l.
TPL 439
Glossy
Volume of 1l.
TPL 459
Glossy
Volume of 1l.
TPL 489
Glossy
Volume of 1l.
High-opaque shades
TPL 122
Glossy
Volume of 1l.
TPL 130
Glossy
Volume of 1l.
TPL 152
Glossy
Volume of 1l.
TPL 162
Glossy
Volume of 1l.
Metallics
TPL 191
Glossy
Volume of 1l.
TPL 192
Glossy
Volume of 1l.
TPL 193
Glossy
Volume of 1l.
TPL 291
Glossy
Volume of 1l.
Further shades
TPL 910
Glossy
Volume of 1l.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
 |
Universal thinner TPV TPV - universal thinner is added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading. Additive - 10-25% Unit of measure: 1l. and 5l. |
 |
Fast thinner TPV2 TPV2 - fast thinner is added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading. Additive - 10-25% Unit of measure: 1l. |
 |
Slow thinner TPV3 TPV3 - slow diluent is added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading. Additive - 10-25% Unit of measure: 1l. |
 |
Retarder medium SV11 SV11 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack). Additive - 1-15% Unit of measure: 1l. |
 |
Hardener H1 H1 - hardener, added to give the paint layer better stability and adhesion. The hardener should be thoroughly and evenly mixed in the paint. The mixture of paint and hardener is unstable and must be recycled within 8 hours. Additive - 10% Unit of measure: 0,1l. and 0,2l. |
 |
Hardener H2 H2 - hardener, added to give the paint layer better stability and adhesion. The hardener should be thoroughly and evenly mixed in the paint. The mixture of paint and hardener is unstable and must be recycled within 4 hours. Additive - 10% Unit of measure: 0,1l. and 0,2l. |
 |
Mattifying powder МР MP matting powder, matting is used for screen printing or pad printing inks with no loss in opacity. Supplement powder the IR is not making a colorful mixture of extraneous binder. Therefore, the properties of the paint remain unchanged. Additive - 1-4% Unit of measure: 1l. |
 |
UR3/ UR4 cleaner UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint. Unit of measure: 5l. |
Metallics are mixed with lacquer TPL 910, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.
 |
Metallic powders Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the large size of the pigments, we recommend using a 25-30 µm depth rasterized cliche when printing with metal powders. Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish TPL 910. |
S 181
Silver
Additive 12,5-17%
Volume of 1 kg.
S 182
Gold
Additive 17-33%
Volume of 1 kg.
S 183
Gold
Additive 17-33%
Volume of 1 kg.
S 184
Gold
Additive 17-33%
Volume of 1 kg.
S 186
Copper
Additive 33-50%
Volume of 1 kg.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
