Paint pad printing with solvent Tampaglass TPGL

 

 

 


Ink for pad printing Tampaglass TPGL is a highly glossy screen-based paint solvents have a range of very bright colors, 2-component system can be applied by aerosol (pre-test is mandatory!).

First paint Tampaglass TPGL is used for printing on glass and ceramics, for example, in the glass and cosmetic industry, as well as for decorating the appropriate promotional products. TPGL compared to other two-component systems is characterized by high resistance to water and fillers.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Tampaglass TPGL.


Application features

very good printing behavior and easy operation / high mechanical and chemical resistance / high efficiency due to high printing speeds

Type (paint)

solvent-based 2-component pad printing ink

Drying speed

fast

The degree of gloss

glossy

Covering capacity

high

Resistance to external environment

high

Application

pad printing / metal printing / glass and ceramic printing

Printed materials

ceramics / lacquered surfaces / glass / metals / glasses / christmas decorations / anodized aluminum / duroplasts / chrome parts

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Tampaglass TPGL                        Color layout



TPGL 920
Pad printing ink TPGL 920
Glossy
Volume of 1kg.

TPGL 922
Pad printing ink TPGL 922
Glossy
Volume of 1kg.

TPGL 924
Pad printing ink TPGL 924
Glossy
Volume of 1kg.

TPGL 926
Pad printing ink TPGL 926
Glossy
Volume of 1kg.

TPGL 930
Pad printing ink TPGL 930
Glossy
Volume of 1kg.

TPGL 932
Pad printing ink TPGL 932
Glossy
Volume of 1kg.

TPGL 934
Pad printing ink TPGL 934
Glossy
Volume of 1kg.

TPGL 936
Pad printing ink TPGL 936
Glossy
Volume of 1kg.

TPGL 940
Pad printing ink TPGL 940
Glossy
Volume of 1kg.


TPGL 950
Pad printing ink TPGL 950
Glossy
Volume of 1kg.

TPGL 952
Pad printing ink TPGL 952
Glossy
Volume of 1kg.

TPGL 954
Pad printing ink TPGL 954
Glossy
Volume of 1kg.

TPGL 956
Pad printing ink TPGL 956
Glossy
Volume of 1kg.

TPGL 960
Pad printing ink TPGL 960
Glossy
Volume of 1kg.

TPGL 962
Pad printing ink TPGL 962
Glossy
Volume of 1kg.

TPGL 970
Pad printing ink TPGL 970
Glossy
Volume of 1kg.

TPGL 980
Pad printing ink TPGL 980
Glossy
Volume of 1kg.



High-opaque shades


TPGL 122
Pad printing ink TPGL 122
Glossy
Volume of 1kg.

TPGL 130
Pad printing ink TPGL 130
Glossy
Volume of 1kg.

TPGL 152
Pad printing ink TPGL 152
Glossy
Volume of 1kg.

TPGL 162
Pad printing ink TPGL 162
Glossy
Volume of 1kg.

TPGL 180
Pad printing ink TPGL 180
Glossy
Volume of 1kg.



Metallics


TPGL 191
Pad printing ink TPGL 191
Glossy
Volume of 1kg.



Etch imitations


TPGL 913
Pad printing ink TPGL 913
Glossy
Volume of 1kg.

TPGL 914
Pad printing ink TPGL 914
Glossy
Volume of 1kg.

TPGL 915
Pad printing ink TPGL 915
Glossy
Volume of 1kg.



Further shades


TPGL 910
Pad printing ink TPGL 910
Glossy
Volume of 1kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner soft UKV1

UKV1 is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 5%

Unit of measure: 1l. and 5l.

Thinner medium TPGLV

TPGLV - a special thinner is added to the paint before use to adjust its properties such as viscosity and spreading before pad printing.

Additive - 20-30%

Unit of measure: 1l. and 5l.

Jet thinner PPTPV

PPTPV - a special solvent is added to the paint before use to adjust its properties such as viscosity and spreading before pad printing, as well as for the use of a sprayer.

Additive - 5-30%

Unit of measure: 1l.

Universal thinner TPV

TPV - universal thinner is added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading.

Additive - 15-30%

Unit of measure: 1l. and 5l.

Slow thinner TPV3

TPV3 - slow diluent is added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading.

Additive - 15-30%

Unit of measure: 1l.

Thinner TPV6

TPV6 - universal thinner is added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading.

Additive - 15-30%

Unit of measure: 1l.

Slow retarder SV3

SV3 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 5-10%

Unit of measure: 1l.

Hardener MGLH

MGLH is a special hardener will be added to the ink immediately before printing. Susceptible to moisture and must be stored in a tightly closed container.

Additive - 5%

Unit of measure: 0,1l.

ES flow improver

ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing.

Additive - 0,5-1%

Unit of measure: 0,1l.

Mattifying powder МР

MP matting powder, matting is used for screen printing or pad printing inks with no loss in opacity. Supplement powder the IR is not making a colorful mixture of extraneous binder. Therefore, the properties of the paint remain unchanged.

Additive - 1-4%

Unit of measure: 1l.

Antistatic paste AP

AP - anti-static paste, used to reduce the impact of static charge on the paint. The paste reduces the viscosity of the paint and due to non-polar particles eliminates the typical phenomenon of "stretching threads"when printing.

Additive - 1-10%

Unit of measure: 1l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with lacquer TPGL 910, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the large size of the pigments, we recommend using a 25-30 µm depth rasterized cliche when printing with metal powders.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish TPGL 910.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 182
Metallic powder S 182
Gold
Additive 25%
Volume of 1 kg.

S 183
Metallic powder S 183
Gold
Additive 25%
Volume of 1 kg.

S 184
Metallic powder S 184
Gold
Additive 25%
Volume of 1 kg.

S 186
Metallic powder S 186
Copper
Additive 33%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 12,5%
Volume of 1 kg.

 

Metallic pastes

Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes.


S 291
Metallized paste S 291
Silver
Additive 10-20%
Volume of 0.2 kg.

S 292
Metallized paste S 292
Gold
Additive 10-20%
Volume of 0.2 kg.

S 293
Metallized paste S 293
Gold
Additive 10-20%
Volume of 0.2 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close