Water base Suede Base with the effect of the pouf and natural suede

 

 

Description


Suede Base is a special base of water-based polyurethane binder designed for screen printing on textiles c simulation of the effects of soft texture suede and volumetric effects poof. Prints obtained using this framework, differ elasticity and high wear resistance.

 

Print options


Types of fabrics

100% cotton.

Mesh selection

31-55 threads/cm, depending on the type of printing.

Recommended tension: 25-35 N/cm.

The choice of the doctor blade

Hardness: sandwich 65/90/65 Sh.

Speed: average.

Tilt angle: 75°.

Stencil

Emulsion: 2+2.

Printed gap: 2 mm.

The drying parameters

Intermediate drying: 93-99 °C.

Final drying: 160 °C, 2 minutes.

Supplements

Additives: pigments Aqua Tint - max. 5% by weight.

Thinner: Reducer 77, Jet Reducer to 3% by weight.

Retarder: Hydracryl Retarder - up to 5% by weight.

Retainer: Special Fixer for resistance to washing up to 15% by weight.

Storage

Store at temperature 18-32º C.

Avoid contact with direct sunlight.

To use during the year of receipt.

 

Features


• print with simulated suede surface, the effect of the hassock;

• feature high wear resistance and resistance to washing;

• used for printing on fabrics of 100% cotton;

• odorless;

• elastic paint with excellent adhesion;

• easy passage through recommended meshes.

 

Printing guidelines


• for best results, follow the recommended printing parameters and the number of grids;

• avoid excessive pressure on the squeegee when printing;

• exact drying times cannot be given due to objective differences in power, distance to the heating element intermediate drying, and the thickness of the applied layer of paint;

• when recommended meshes with an intermediate or minimum diameter of the filament;

• to optimize the printing process use a well-strained shape;

• before printing, necessary in dye to add 3-5% thinner Reducer 77, which prevents the thickening of the ink on the printed form, for subsequent dilution to use only the diluent Jet Reducer (1-3%);

• Hydra Retarder retarder helps to improve the stability of the paint on the stencil. Additive of 3-5% in the paint;

• to improve resistance to washing, a possible Supplement of up to 10-15% Special Fixer. The mixture's work time is limited to 8-10 hours;

• for stencil cleaning use water.

 

Special recommendation


• test for drying are required prior to beginning the print run. Insufficient or excessive drying will result in poor stability of the print to wash, and poor adhesion of paint. The temperature on the surface of the impression with intermediate and final drying must be monitored with a pyrometer or other means;

• responsibility for the correct selection of paint to a printing material lying on the technologist or the printer responsible for making paint and printing options;

• before printing the paint should be stirred;

• decrease the viscosity of the paint (when diluted) affects opacity;

• for any application not referred in this manual, necessary to carry out preliminary tests or to consult a specialist.

Close