The shafts for the conveyor tunnel dryers

 

Description

LTD "Reklamnaya Sreda" offers a conveyor drive and idler shafts for any conveyor tunnel dryers.

We manufacture conveyor drive and idler shafts according to Your specifications.

Drive shaft are the mechanism used to move the conveyor belt. A method of transmitting tractive effort is due to the motor. Communication with the engine is provided via a special transmission mechanism. The material is stainless steel of a suitable type for the requirements of this type of equipment. They have the necessary characteristics to ensure the long-term. Made the shaft should always be slightly wider than the tape, which he will move. It was created to prevent slipping or other problems during the rotation.

The tensioning shaft is applied in order to provide the necessary tension and increase the grip with the conveyor mesh. Also, the design of the product allows to prevent slippage of the ribbon during rotation of the shaft.

As an important parameter, providing high performance shaft is the pulling force, all the produced models have a surface with a high coefficient of friction. We carry out production strictly in accordance with numerous standards in this area.

 

Download the order form "Drive shaft with bearings"

Download the order form "Drive shaft without bearings"

Download the order form "Suspended shaft with the bearings"

Download the order form "Suspended shaft without bearings"

Close