Universal aerosol adhesive Scotch-Weld 77



The basis
Temporary bonding
Permanent bonding
Temp. application
One-component elastomeric
15 sec. - 3 min.
30 sec. - 10 min.
above +15 °C
500 ml.


All-purpose adhesive Scotch-Weld 77 quick steps for permanent mounting and fixing. When applied to both surfaces connects almost all popular materials, including foam, fabric, cardboard, wood, plastics, foil, rubber and more. Advantages: translucent, warps the paper, doesn't filter; low power consumption; versatile - securely bonds most lightweight materials; fast and securely grasped; does not damage foamed polystyrene. Used for bonding decorative fastener layout for installation of baguettes, creation of POS structures, bonding gaskets, apply a thin decorative films, foils, fabrics, labeling, gluing the substrate of a fabric, installation of exhibition stands.

Usage instructions

Before use the container should be vigorously shaken several times. The width of the spray torch spray adhesive Scotch-Weld 77 can be changed by turning the spray nozzle from the position "L" (the minimum width of the torch) to the position "H" (maximum width). Prior to application of adhesive on intended for connection surface, you should ensure that he does not destroy these materials. This is especially important when connecting plastics, painted and varnished surfaces.

Make sure the surface is dry and clean, free of dust and oily contamination. Turn the sprayer to the mark located on the neck of the balloon to choose the correct direction of the jet. Shake the container for 5-10 seconds. Keep the cylinder at a distance of 15-20 cm from the surface. Apply a uniform pressing force on the spray nozzle when applying glue to the entire surface. Connect the bonding parts at the time of the greatest activity of the glue.

To obtain temporary connections, or connections not requiring high strength glue enough to put on one of the joined surfaces. In this case, the connection should be made, when the glue is still wet; normally open time when unilateral application is 15 seconds. up to 3 minutes after applying adhesive.

To obtain the most durable joints the glue should be applied to both the bonding surfaces. When double-sided printing the open time is from 30 seconds to 10 minutes. The optimal method of applying the adhesive and the open time depends on the materials used and strength required for the connection. In all cases, spray applied adhesive from a distance of 15 to 20 cm from the surface.


Store in tightly closed, original containers, avoiding direct sunlight. Shelf life at temperatures from +15°C to +25°C 12 months.