Manual roundabouts for a stencil process on textiles, production Germany



Type of drive manual manual manual
Number of printing units, units 4 6 8
Number of printed tables, pieces 4 6 8
Max. print size, mm 400 х 500 400 х 500 400 х 500
Max. size of the printed frame, mm 600 х 750 600 х 750 600 х 750
Size of the printing table, mm 460 х 680 460 х 680 460 х 680
Maximum height, mm 20 20 20
Speed, cycle / shift to 1500 to 1500 to 1500
The max. diameter of the printing press, mm 3200 3200 3400
Weight, kg 170 230 320


Hand turning machines are designed for multi-color printing of textiles such as T-shirts, sweatshirts, jackets, cut, work and casual wear, etc.

Manual lathe machine Standard accessories:

• Regardless of rotating relative to each other host platforms: platform platforms and tables printed circuit assemblies.

1. The platform is equipped with tables:

• Heat resistance and solvent printing tables made ??out of spec plywood. The fastening system allows for a few seconds to implement removal and installation of the table that plays an important role in the changeover. Additionally, the machines can be equipped with printed tables different sizes and shapes: Print on umbrellas, pockets, trousers, sleeves, etc. Optionally equipped with a vacuum table and a fan to keep the printed material on the printing table. This vacuum system allows you to work without adhesive additives , thereby increasing the speed and convenience of the printing process, and also to prevent sticking residues of the adhesive layer on the reverse side of the product.

• Centering steel bearings, which when combined with a capital plate daet precise positioning of the printhead and the printing table with their combination in the printing process. This system is considered the best for positioning and alignment in multi-color printing on textiles.

2. The platform is equipped with printed circuit assemblies:

• Clip, which are equipped with rigid holders screw securing the printing frame in 2 points. Securely hold the frame holders, which prevents printing during its displacement and mobility, as well as to prevent re- alignment. The clamp is able to capture the frame profile thickness to 50 mm.

• Micrometer register, which allows to center the printed form in all directions with respect to the printing table.

• Regulators height from which it is possible lifting frame printed on the table by 25 mm, which allows printing material thickness of 20 mm.

• Velcro coersion. Allowing secure the PCA after centering screen frame.

• Spring with tension adjustment , which provide lift screen frame during printing.



Для содержимого этой страницы требуется более новая версия Adobe Flash Player.

Получить проигрыватель Adobe Flash Player