Manual carousel screen printing on textiles Series Light

 

Characteristics

Модель 1 2 3
Type of drive manual manual manual
Number of printing units, units 4 4 4
Number of printed tables, pieces 2 1 4
Max. print size, mm 400 х 500 400 х 500 400 х 500
Max. size of the printed frame, mm 600 х 700 600 х 700 600 х 700
Size of the printing table, cm 46х53 55x75 / 46х58 / 42x55 / 33x47/ 26x40 55x75 / 46х58 / 42x55 / 33x47/ 26x40
Maximum height, mm 20 20 20
Speed, cycle / shift to 1500 to 1500 to 1500
Micrometric register - + +
The diameter of the printing press, mm 2000 1800 2000
Weight, kg 60 131 185

Description

Hand turning machines are designed for multi-color printing of textiles such as T-shirts, sweatshirts, jackets, cut, work and casual wear, etc.

Hand Boring Machine Series «Light» Standard Package:

• Regardless of rotating relative to each other host platforms: platform platforms and tables printed circuit assemblies.

1. The platform is equipped with tables:

• Heat-resistant and resistant to solvents printing table, made of special. plywood. Attachment system allows for a few seconds to implement removal and installation of tables, which is important in the process of changeover. Additional machines can print staffed tables with different sizes and shapes: Print on umbrellas, pockets, trousers, sleeves, etc.

• Centering steel bearings, which when combined with the plate, the Capital daet precise positioning of the printhead and printing table with their combination in the printing process.

2. The platform is equipped with printed circuit assemblies:

• Clamps, which are equipped with rigid holders screw securing the printing frame in 2 points. Securely hold the frame holders, which prevents printing during its displacement and mobility, as well as to prevent re-alignment. Side clamp is able to capture the frame profile thickness up to 50 mm.

• Privodka micrometer, which allows centering of the printing form in the same direction relative to the printing section.

• Regulators height from which it is possible lifting frame printed on the table by 25 mm, which allows printing material thickness of 20 mm.

• Velcro-registration. Allowing you secure site when printing alignment screen frame.

• The spring with tension adjustment, which provide lift screen frame during printing.

Close