Manual screen printing carousel for baseball caps



Type of drive manual
Number of printing units, units 4
Number of printed tables, pieces 1
Max. print size, mm 70 х 140
Max. size of the printed frame, mm 210 x 300, profile 3 sides 30x30, 1-side and 30х5
Speed, cycle / shift to 1500
The diameter of the printing press, mm 1200
Weight, kg 60


Manual lathe for screen printing is designed for multi-color printing on sports head products (caps).

Manual lathe standard accessories:

• Rotating work platforms printed circuit assemblies , relative to the platform mounting caps.

1. Platform mounting caps completed:

• Platform, which allows for a few seconds to carry out removal and installation of the product, which plays an important role in the printing process. The platform has a height adjustment as well as adjustment to stretch zipper.

• Centering steel bearings, which when combined with the cylinder, the Capital give precise positioning the printhead and printing table with their combination in the printing process. This system is best for positioning and alignment in multi-color printing on textiles.

2. The platform is equipped with printed circuit assemblies:

• Side clips that feature rigid holders screw fixing the printing frame in 2 points. Securely hold the frame holders, which prevents printing during its displacement and mobility, as well as to prevent re- alignment. Side clamp is able to capture the frame profile thickness up to 50 mm.

• Micrometer register, which allows to center the printed form in two directions with respect to the printing table.

• Turn the height from which it is possible lifting of the printed frame relative to the platform 25 mm, allowing seal material thickness of 20 mm.

• Velcro-registration. Allowing you secure site when printing alignment screen frame.

• Hydraulic shock absorbers that provide a smooth rise of screen frame during printing.