Ready to use paste for removing emulsion Pregasol P

 

 

Description

PREGASOL P - ready to use, quick and effective paste for removal of coatings, it applies to all emulsions of polyvinyl alcohol. It is especially good for emulsions that are difficult to remove (long reaction time) or stencils large (vertical). PREGASOL P is odorless, does not contain chlorine and does not damage the fabric. It does not have the effect of bleaching. Due to its pasty consistency it easy to apply. PREGASOL P is not suitable for gelatin emulsions (irreversible film).

Application

Thoroughly clean the stencil of all traces of paint (for example, using detergent-based Water based solution such as PREGAN C 44 A), then rinse thoroughly with water. Remove the remaining water from the screen in order to avoid dilution of the means for removing the emulsion.

Then, with a brush or sponge evenly PREGASOL P on both sides of the stencil. Gently rub with a brush and after about 2 minutes, wash with a strong jet of water (using a device operating at high pressure).

STORAGE. 12 months (at 20-25 ° C).

Close