Alkaline product for removal of dirt, paint residues and emulsion Pregan Megaclean X-TRA




Pregan Megaclean X-TRA is a viscous alkaline product based on solvents for cleaning stencils used to remove a "double images", remnants of paint, emulsion or capillary film after exfoliation. In addition, in combination with means to remove the "double images" (e.g. Pregan Anti-Ghost Extra) can be used as activator for removal of residual emulsion. Pregan Megaclean X-TRA has a high flashpoint and virtually no odor. Due to high viscosity can be applied onto the mesh using a squeegee-ditches or brush. After the usual dilution of a mixture of cleaner water can be drained in biological ponds.


As a means to remove excess paint and exposed printing plate:

Before starting work, a means to stir a bit and put on a dry or slightly damp surfaces contaminated stencil evenly on both sides with a squeegee-cell or a brush. You should use a squeegee-cell stainless steel because of the cell from aluminum, depending on the exposure time may be chemical corrosion. Pregan Megaclean X-TRA can also be applied with a brush (eg, KIWO Screenbrush # 4). After 2-5 minutes (maximum 10 minutes) required for the reaction, stencil with plenty of water, for example, hand-held shower. Making sure that all remnants Pregan Megaclean X-TRA rinse, rinse the net gidropistoletom high pressure. When working with the product highly recommended to use protective equipment (apron, goggles, gloves, etc.)

As an activator to remove shadow images with incomplete peeling emulsion:

After the necessary pre-exposure (12 hours), oxidizing agents such as, for example, Pregan Anti-Ghost Extra, put Pregan Megaclean X-TRA on both sides of the grid, sharing it with the squeegee-cell made of stainless steel or a brush. A few minutes later the grid thoroughly with water, after which the process gidropistoletom high pressure.

Since Pregan Megaclean X-TRA glue dissolves, avoid applying to the bonding grid to place the frame.


STORAGE. 9 months (at 20-25 ° C).