Powder Metallic metallic powders for mixing with water base




Powder Metallic - metal powders to mix with screen printing inks and transparent base, water based Clear For Metallic is to produce metallic paints and special effects.

Metal powders are recommended for mixing with base Clear For Metallic, having high brightness and saturation. The fraction of metal particles 32-38 microns. Additive metal powders Powder Metallic to obtain a colored metallic paint on the base Clear For Metallic up to 20% by weight.

In the range of 8 powders of different colors, which allows to obtain a variety of straight colors and their combinations.

In addition, to provide additional color shade of metallic paint you can add pigments Aqua Tint to 1%.


Color palette



*Please note that colors on monitor may vary from actual.


Special recommendation

• test for drying are required prior to beginning the print run. Insufficient or excessive drying will result in poor stability of the print to wash, and poor adhesion of paint. The temperature on the surface of the impression with intermediate and final drying must be monitored with a pyrometer or other means;

• responsibility for the correct selection of paint to a printing material lying on the technologist or the printer responsible for making paint and printing options;

• before printing the paint should be stirred;

• decrease the viscosity of the paint (when diluted) affects opacity;

• for any application not referred in this manual, necessary to carry out preliminary tests or to consult a specialist.