Manual flatbed screen printing equipment with vacuum table, a series of Light

   

 

Characteristics

Model of the printing press 6070MP
Type of drive manual
Number of printing units, units 1
Number of printed tables, pieces 1
Max. print size, mm 600 х 700
Max. size of the printed frame, mm 800 х 900
The size of the vacuum table, mm 700 х 800
Maximum product height, mm 80
Speed of work, cycle / shift to 3200
Power, V 220
Dimensions (LxWxH), mm 800x1020x1050

Description

Manual printing press for screen printing is designed for sealing sheet materials such as paper, cardboard, adhesive tape, various plastics, wood, furniture products, metal, glass, plastic bags, etc.

Manual flatbed screen printing machine equipped with:

• Vacuum table and the fan for reliable fixing of the printing material on the printing table. This vacuum system allows you to work without adhesive additives, thereby increasing the speed and convenience of the printing process, as well as to prevent residue from sticking the adhesive layer on the reverse side of the product. The inclusion of the vacuum automatically when lowering the screen form and off when lifting and foot pedal.

• Clamps, which are equipped with rigid holders screw securing the printing frame. The clamps are adjustable for any size of stencil plate. The holders securely hold the frame, eliminating in the process of printing its displacement and mobility, as well as to prevent re-alignment.

• Micrometer register, which allows to align the position of the vacuum table in all directions relative to the printing form.

• Turn the height from which you can adjust the printing gap between the screen frame and a vacuum table that will seal the bulk sheet material thickness of 80 mm.

• Clamps register. Allowing you secure the vacuum table after centering screen frame.

• Metal counterweight screen frame.

• Carrier metal support, which provides maximum stability manual stencil machine.

Close