Plastisol inks for screen printing on textiles


White plastisol inks


White plastisol paint Olympia Plus White

Bright white plastisol paint designed specifically for screen printing on fabrics, dyes which are non-migrating. Perfect for printing the substrate, as it has a short time intermediate drying and weak stickiness.


White plastisol paint Sprint White

The white paint of the highest quality, which has excellent printing properties and has an attractive appearance. The paint is versatile, and can be used in printing the substrate, and when printing, painting white color.


White plastisol paint Single LC White

Bright white plastisol ink for screen printing with high viscosity, which allows to achieve maximum coverage and resistance to migration of fabric dyes at low temperature drying.


White plastisol paint Stretch White

White paint with high tensile properties. Specially designed as a paint with a lower drying temperature, compared with conventional plastisol paints.


Colored series plastisol inks


Color series paints Epic Standard

A series of paints designed specifically for printing "wet on wet" with high performance. Genesis paint are also used to print transfer cold compartment (cold-peel).


Color series paints Epic CMYK

Series of colors for color printing. Allows you to achieve "clean" and saturated colors when printing. These paints are also suitable for printing "wet on wet". After complete curing of the prints are very soft to the touch.


Color series paints Epic MX (Color Matching System)

A series of colours MKH presents colors of 15 colors that make it easy to mix the desired colors in the Pantone system. MX inks are designed for printing on light and dark (with white underlay) fabrics. Allows high-speed printing.


Color series paints Epic Rio (Color Matching System)

This is a new series presented by colors from 18 colors, free of phthalates for direct screen printing on textiles. Brand new opaque inks are perfectly balanced to produce accurate colors according the Pantone system.


Color pigments Epic PC (Express Color Matching)

A series of pigments PC are 15 shades that are mixed with a base to obtain the finished paint. Paint PC is designed for printing on light and dark (with white underlay) fabrics, allow to obtain the desired colors in the Pantone system.


Color series paints One-Step Nylon (OSN)

A series of paints designed specifically for printing on untreated 100% nylon. Paint can be used as a regular plastisol. This ink series is fast intermediate drying and curing at a temperature of 149°C.


A series of paints containing puff NuPuff

A series of paints containing in its composition of puff. Is used for printing relief images. Has good durability and resistance to external influences.


Printing textile transfers hot and cold compartments


Series of inks for transfer printing Transflex Soft

A series of inks designed for printing transfers to office hot (hot-split) for white and light fabrics, and are ultra-soft after transfer, can also be used for printing transfers the cold compartment (cold-peel).


Series of inks for transfer printing Transflex Super

A series of inks designed for printing transfers hot (hot-split) and a cold compartment (cold-peel) on dark fabrics. Colors you can print transfers with high detail using a relatively fine grid, without loss of opacity.


Color series of inks for transfer printing Transflex Process Inks

Series of colors for color printing. Specially designed to print full color transfers with excellent color reproduction in screen printing with photographic quality.


Base for transfer printing Transflex Transclear

Transparent transfer paint (the base) serves as a complementary of the first printing layer serves to facilitate the separation of the transfer paper when transferring the transfer.


Adhesive for transfer printing Transflex Adhesive

Adhesive transfers hot and cold compartments, is used for use as the adhesive layer for all inks Transflex series. The adhesive is versatile and can be used for printing on transfer papers of any type.


Special effects for printing on textiles


Soil to prevent migration of the dye Armor LC Gray

Low temperature primer designed to block migration of dyes when printing.


Base with the effect of balsa wood Cork Base

The base was designed to create a progressive volumetric tube structure. In the print result can be obtained as a volumetric layer, and smooth.


Base with stone effect Rock Base

Base can be used alone or in combination with other products to achieve different effects (solid rock, coarse rope, etc.).


Sculptural base Sculpture Base

The base was designed specifically to print high layer and after application to the fabric creates a smooth, clear, textured image.


Soft base Fashion Soft Base

The base was designed specifically to print high layer and after application to the fabric creates a smooth, clear, textured image. Designed to help printers and designers because it creates a cool graphic concept and soft impression.


Base effect suede Natural Suede

The base was designed to create fingerprint like suede or velvet, soft, but at the same time resistant to washing. Helps printers to create fashion designs on the clothes and the concept of printing new generation.


High-density transparent base High Density Clear

The base was designed to create special effects such as imitation of glass effect gel, water and other prints with high gloss. Can be used for printing via high stencil and mix with other textured paints.


Base effect bubbles Bubble Stretch Base

The base was designed to create a textured opaque print, with a high stretching ability. After curing the paint has a semi-gloss appearance, the surface is a small holes and craters.


Base-effect plush Plush Base

The base was developed to obtain tissue simulate chenille, velvet, flock and suede.


Base for printing effect glitter Nova Base

A special transparent base was designed to print the effect of the glitter, as well as to create other special effects.


Paint sparkling yellow Yellow Sparkle

Paint-effect sparkles on a glossy surface. Very stable prints.


Reflective base Imagebrite

The base was designed to create a reflective effect. Is composed of glass beads coated with aluminum, they give the paint a high ability of reflection of light.


Additive antifoil Foil Resist Additive

Supplement is used in order to avoid adhesion of the foil to some parts of the design under thermal pressure. Does not change printing properties and appearance of the paint after curing.


Supplement effect of the rise of puff FlexiPuff

Supplement has been formulated to achieve the effect of lifting. Especially interesting for small businesses, which are awkward to store in a warehouse the full list of special paints to puff.


Paint with the effect of liquid silver Liquid Silver

Coating paint having the characteristic silver sheen. Can be used for flat printing and for the creation of a high layer. Paint is ready to use.


Paint with the effect of liquid gold Liquid Gold

High-coating plastisol paint to create a bright golden effect. Can be used for flat printing and for creating high layers. Paint is ready for use.


Metallic inks Metallic Shimmer

Ink is formulated for printing of metallic effects and has excellent washability and abrasion resistance. You can print on dark and light fabrics without backing.


Ready glittery paint Glitter PFX

Paint is specially formulated to print sequin glittery effect. Glittery dye used in printing for decoration design elements, and as separate colors.

Close