Overcoat varnish for coating and fixing the decorations on the substrates


Features

Product series
T-203 (M)
T-204Y (M)
Operating temperature
20°С - 25°С
20°С - 25°С
Burned at a temperature of
400°С
400°С
Viscosity
13~15 Poise
13~15 Poise
Solid content
44%
44%
Appearance
transparent liquid
yellow liquid

Description

The top coat consists of acrylic resin, solvent and plasticizer and is used to cover and secure the decoration on the substrate. This coating allows you to remove the decal entirely with dekolnymi of paper, put in the water for transfer to a container made of glass or ceramics.

Screen mesh:

27-39 lines per cm gives a dry film thickness 20-25 microns.

Drying:

5-6 hours on the shelves of the dryer with good ventilation, 40-60 minutes in the drying tunnel.

Storage of the decals:

For long-term storage lay each sheet of decals plastic or nylon paper to prevent adhesion.

Close