Self-adhesive mounting film MT-80

 

Characteristics

Thickness* (film with glue)

0.100 mm

Adhesive force*, (FINAT-TM1 after 20 minutes, stainless steel)
2 N / 25mm
Tensile strength (DIN EN ISO 527)

In the longitudinal direction: 19 MPa min.

Elongation at break (DIN EN ISO 527)

In the longitudinal direction: min. 130 %

Shelf life**
2 years
Bonding temperature
≥ 10 ° C
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe.

Description

Transparent mounting film on the basis of PVC, coated, for transfer of die-cut or computer-cut letters and symbols.

The substrate

Gasinova paper with double-sided silicongermanium, white, 62 g/m2.

Glue

Modified polyacrylate adhesive on solvent base, medium adhesive strength.

Application

The special composition of the polyacrylate adhesive enables unproblematic transfer of die-cut or computer-cut letters and symbols the Ability to remove without any residues, without a substantial increase in adhesion observed even after more than 6 months. High tensile strength of the material of the film ensures precise positioning. This material should be used where it is desirable reusability film tape. Created protective paper pressure on the opposite side of the material facilitates precise adjustment of the individual fragments.

Comment

Surfaces to which the material will be applied must be free of dust, grease and other contaminants that can adversely affect the adhesion of the material. When the new lacquered or painted surfaces should be dried to complete solidification. The compatibility is necessary to conduct tests using application envisaged lacquers. Moreover, it should take into account the recommendations of the processing material. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Close