Self-adhesive mounting paper MT-52

 

Characteristics

Thickness* (without protective paper and adhesive)

0.075 mm

Weight* (film and adhesive)
80 g/m2
Adhesive force*, (FINAT-TM1 after 20 minutes, stainless steel)
4 N / 25mm
Tensile strength (DIN EN ISO 527)

In the longitudinal direction: 5,1 MPa min.
In the transverse direction: 3,2 MPa min.

Elongation at break (DIN EN ISO 527)

In the longitudinal direction: min. 1,4 %

In the transverse direction: min. 2,7 %

Shelf life**
6 months
Bonding temperature
≥ 10 ° C
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe.

Description

Semi-transparent mounting paper for the transfer of die-cut or computer-cut letters and symbols.

The substrate

Missing

Glue

Natural rubber, medium adhesive strength.

Application

The special composition of the adhesive enables problem-free transfer of die-cut or computer-cut letters and symbols using dry bonding. This mounting paper is suitable for almost all known film types, with shiny and Matt surface.

Comment

Surfaces to which the material will be applied must be free of dust, grease and other contaminants that can adversely affect the adhesion of the material. When the new lacquered or painted surfaces should be dried to complete solidification. The compatibility is necessary to conduct tests using application envisaged lacquers. Moreover, it should take into account the recommendations of the processing material. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Close