Self-adhesive film series 8810

 

Characteristics

Thickness* (without protective paper and adhesive)

0,080 mm

Dimensional stability (FINAT TM 14)
Adhered to steel shrinkage 0,1 mm max.
Thermostability***
Adhered to aluminium, from -40°C to +90°C
Resistance to cleaning agents
Adhered to acrylic, after 8 hours of stay in the washing suds (0,5% household cleaning agent) at room temperature and at 65°C, without changes
Fire behaviour (DIN 4102-1)
Fire-resistant (class DIN 4102-B1) on glass with a bulk density of >= 2250 kg/mi (for indoor use)
Adhesive force*, (FINAT-TM1 after 24 hours, stainless steel)
18 H/25mm glass
16 H/25 mm acrylic glass
Tensile strength (DIN EN ISO 527)

In the longitudinal direction: 9 MPa min.
In the transverse direction: 9 MPa min.

Elongation at break (DIN EN ISO 527)

In the longitudinal direction: min. 40 %

In the transverse direction: min. 40 %

Shelf life**
2 years
Bonding temperature
> +8° C

Lifetime when properly processed

Under vertical outdoor exposure (normal climate of Central Europe)

7 years
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe.

Description

High performance cast PVC film for high quality glass decoration with very good resistance to weathering and UV rays. Reduced level of surface gloss and the roughly structured surface avoids unwanted glare.

The substrate

Special polyester film, 0,100 mm.

Glue

Polyacrylate adhesive is a solvent-based, providing permanent adhesion.

Application

This material designed for glass surfaces on which must be achieved the effect of frost or freezing, in particular, for high-quality design of shop Windows, mirrored surfaces and glass doors. Suitable for processing on cutting plotter systems. Wet application is recommended.

Printing method

Recommended screen printing.

Comment

The basis on which the gluing must be free from dust, grease and other contaminants that can adversely affect the bond strength of the material. When printing, the ink should be dried and cured completely. To determine the compatibility be applied must be thoroughly tested with provided paints. In addition, you should take into account the recommendations of the processing of the material. The batch traceability according to ISO 9001 is done on the basis of the roll number.

Colors

ATTENTION! The colors on your monitor may vary from actual!

Close