Self-adhesive film series 8300

 

Characteristics

Thickness* (without protective paper and adhesive)

0,080 mm

Dimensional stability (FINAT TM 14)
Adhered to steel in the transverse direction, there is no
measurable shrinkage in the longitudinal direction is 0.4 mm max.
Thermostability***
Adhered to aluminium, from -40°C to +80°C
Resistance to cleaning agents
Adhered to acrylic, after 8 hours of stay in the washing suds (0,5% household cleaning agent) at room temperature and at 65°C, without changes
Adhesive force*, (FINAT-TM1 after 24 hours, stainless steel)

18 H/25mm glass

16 H/25 mm acrylic glass

Tensile strength (DIN EN ISO 527)

In the longitudinal direction: 19 MPa min.
In the transverse direction: 19 MPa min.

Elongation at break (DIN EN ISO 527)

In the longitudinal direction: min. 130 %

In the transverse direction: min. 150 %

Shelf life**
2 years
Bonding temperature
> +8° C
Lifetime when properly processed
5 years
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe.

Description

Resistant to UV rays, transparent colored PVC film with a glossy surface.

The substrate

Silicone coated paper with double-sided polyethylene coating, 137 g/m2.

Glue

Polyacrylate adhesive is a solvent-based, providing permanent adhesion.

Application

Stained glass self-adhesive tape for the production of high-quality illuminated advertising systems and for the decoration of glass surfaces with backside illumination. Suitable for processing on cutting plotter systems. Film may be applied in dry and wet condition, whitening of the adhesive is not observed. Also, the film includes special absorbers that give it high resistance to UV radiation.

Printing method

Recommended screen printing.

Comment

The basis on which the gluing must be free from dust, grease and other contaminants that can adversely affect the bond strength of the material. When printing, the ink should be dried and cured completely. To determine the compatibility be applied must be thoroughly tested with provided paints. In addition, you should take into account the recommendations of the processing of the material. The batch traceability according to ISO 9001 is done on the basis of the roll number.

Colors

ATTENTION! The colors on your monitor may vary from actual!

Close