Self-adhesive film series 6510

 

Characteristics

Thickness* (without protective paper and adhesive)

0,11 mm

Dimensional stability (FINAT TM 14)
Adhered to steel in the transverse direction, there is no
measurable shrinkage in the longitudinal direction is 0.3 mm max.
Thermostability***
Adhered to aluminium, from -40°C to +105°C
Resistance to sea water (DIN 50021)
Adhered to aluminium, after 100 h./23°C without changes
Adhesive force*, (FINAT-TM1 after 24 hours, stainless steel)
16 N/25 mm
Tensile strength (DIN EN ISO 527)

In the longitudinal direction: 13 MPa min.
In the transverse direction: 13 MPa min.

Elongation at break (DIN EN ISO 527)

In the longitudinal direction: min. 100 %

In the transverse direction: min. 100 %

Shelf life**
2 years
Bonding temperature
> +8° C
Lifetime when properly processed
1 year (without printing)
* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe.

Description

Cast PVC fluorescent self-adhesive tape, eye-catching due to intense fluorescence under all daylight conditions. In particular, the effectiveness of this material appears in twilight and in other conditions of poor visibility, and has high brightness under UV illumination.

The substrate

Silicone coated paper with double-sided polyethylene coating, 137 g/m2.

Glue

Polyacrylate adhesive is a solvent-based, providing permanent adhesion.

Application

For external use in the manufacture of advertising on cars and vehicles, as well as shields and inscriptions of any kind that should attract special attention. Very well suited for use on cutting plotter systems.

Printing method

Recommended screen printing.

Comment

The basis on which the gluing must be free from dust, grease and other contaminants that can adversely affect the bond strength of the material. When printing, the ink should be dried and cured completely. To determine the compatibility be applied must be thoroughly tested with provided paints. In addition, you should take into account the recommendations of the processing of the material. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Colors

ATTENTION! The colors on your monitor may vary from actual!

Close