Self-adhesive film ORACAL series 640, oracal 640, self-adhesive sheet, sheet oracal, film oracal with permanent adhesive, film for printing sheets, adhesive tape 640 series, self-adhesive film with a substrate film for outdoor advertising, self-adhesive for indoor advertising, self-adhesive plotter film

Home / Materials for advertising / Self adhesive film / Series 640

Self-adhesive film series 640

Characteristics

*Thickness (without protective paper and adhesive)**	0.080 mm
Dimensional stability (FINAT TM 14)	Adhered to steel in the transverse direction is observed no measurable shrinkage in the longitudinal direction - max. 0.4 mm
Thermostability***	Adhered to aluminum, -40 ° C to 80 ° C, no variation
Resistance to sea water (DIN 50021)	Adhered to aluminum after 48 hr. / 23 ° C no changes
*Adhesive force, (FINAT-TM1 after 24 hours, stainless steel)**	6 N / 25mm
Tensile strength (DIN EN ISO 527)	In the longitudinal direction: 19 MPa min. In the transverse direction: 19 MPa min.
Elongation at break (DIN EN ISO 527)	In the longitudinal direction: min. 130 % In the transverse direction: min. 150 %
Shelf life**	3 year
Bonding temperature	≥ 0 ° C (dry gluing)
Lifetime when properly processed	3 years, " glossy gold 1 year

* average ** in original packaging, at 20°C and 50% relative humidity *** normal climate of Central Europe.

Description

Very tight soft PVC film. Transparent or white glossy or matte surface.

The substrate

Silicone coated paper on one side, 135 g / m²

Glue

Polyacrylate, permanent adhesion.

Application

For the application of short-term and medium-term markings, inscriptions and decorations when applied externally. For internal use is almost unlimited. The film is suitable for promotions, window dressing of shops, the interior design of premises, advertising inside the vehicles, self-adhesive labels.

Printing method

Recommended screen printing (flexographic printing and UV offset printing requires special paint).

Comment

Surfaces to which the material will be applied must be free of dust, grease and other contaminants that can adversely affect the adhesion of the material. When the new lacquered or painted surfaces should be dried to complete solidification. The compatibility is necessary to conduct tests using application envisaged lacquers. Moreover, it should take into account the recommendations of the processing material. The batch traceability according to ISO 9001 is possible on the basis of the roll number.

Colors

ATTENTION! The colors on your monitor may vary from actual!