White plastisol ink for printing on cotton fabrics Olympia Plus White


Plastisol paint Olympia Plus White is a bright white paint, specially designed for printing on 100% cotton fabrics c non-migrating dyes. Optimally suitable for printing the substrate, as it has a short time intermediate drying and weak stickiness.

Olympia Plus White is a great versatile white plastitalia General purpose paint.


Print options

Types of fabrics

100% cotton.

Mesh selection

34-120 threads/cm, depending on the type of printing.

Recommended tension: 25-35 N/cm.

The choice of the doctor blade

Hardness: 60-90 Sh a single-layer, three-layer 65/90/65 Sh.

Edge: sharp.

Speed: fast, with abundant irrigation.

Avoid excessive pressure on the squeegee during printing.


Emulsion: 2+2.

Printed gap: 2 mm.

The drying parameters

Intermediate drying: 93-99 °C (200-210 °F).

Final drying: 160 °C (320 °F).


Diluent: 10070RDCR Curable Reducer up to 5% by weight.

Thickener: 10025VB QEC Viscosity Buster - 3% by weight.


Store at temperature 18-32º C.

Avoid contact with direct sunlight.

To use during the year of receipt.



• used for printing on fabrics of 100% cotton;

• fast intermediate drying and minimal residual stickiness;

• does not require a cooling station;

• used as a substrate, and as a standalone white;

• it is possible to print using a high-resolution grid;

• high opacity;

• odorless;

• bright, matte prints;

• easy passage through the recommended grid;

• an overlap of cloth and fibers;

• great universal white General purpose paint.


Printing guidelines

• for best results, follow the recommended printing parameters and the number of grids;

• avoid excessive pressure on the squeegee when printing;

• exact drying times cannot be given due to objective differences in power, distance to the heating element intermediate drying, and the thickness of the applied layer of paint;

• before you print, run the desktops of the machine;

• to increase the speed of production, use mesh higher resolution, which will reduce the drying time. Adjust the machine settings and drying so that after intermediate drying of the top layer of paint was dry to the touch;

• to optimize the printing process use a well-strained shape.


Special recommendation

• Test for drying are required prior to beginning the print run. Insufficient or excessive drying will result in poor stability of the print to wash, and poor adhesion of paint. The temperature on the surface of the impression with intermediate and final drying must be monitored with a pyrometer or other means.

• Responsibility for the correct selection of paint to a printing material lying on the technologist or the printer responsible for making paint and printing options.

• Before printing the paint should be stirred.

• Avoid excessive intermediate drying, as this may result in poor adhesion of paint layers when multi-color printing.

• You should also avoid printing on fabrics made of polyester because of possible migration of dyes.

• Decrease the viscosity of the paint (when diluted) affects opacity.

• Sealed image can not be subjected to dry cleaning, bleaching, and Ironing with a hot iron.

• For any application not referred in this manual, necessary to carry out preliminary tests or to consult a specialist.