Plastisol base Natural Suede effect suede or velvet

   

 

Description


Plastisol base Natural Suede Base - special plastitalia base, designed for textile printing in c, simulating the effects of soft texture of suede or velvet. Prints obtained using this database, high wear resistance. In combination with other special bases it is possible to obtain the effect of the skin and other textures.

 

Print options


Types of fabrics

100% cotton, mixed fabrics.

Mesh selection

34-90 threads/cm, depending on the type of printing.

Recommended tension: 25-35 N/cm.

The choice of the doctor blade

Hardness: 65-75 Sh single-layer, three-layer 75/90/75 Sh.

Profile: rectangular.

Edge: sharp.

Speed: average.

Stencil

Emulsion: 2+2.

Capillary film: 200-400 microns.

Printed gap: 2 mm.

The drying parameters

Intermediate drying: 70 °C (160°F).

Transfer: 160 °C (320°F).

Supplements

Supplements: MX - max. 25%, PC - max. 10% by weight.

Diluent: 10025VB QEC Viscosity Buster - 1% by weight.

Storage

Store at temperature 18-32º C.

Avoid contact with direct sunlight.

To use during the year of receipt.

 

Features


• Print with simulated suede surface.

• Is used for direct printing on dark and light textiles.

• Feature high wear resistance and washability.

• Odorless.

• Paint is easy to use. Suitable for both manual and automatic printing.

 

Printing guidelines


• To maintain the softness and fuzziness of the print inherent to the suede, don't add too many Kohler pigments or paints.

• To achieve the desired surface effect you need to adjust the time and temperature finish drying.

• To obtain the effect of the skin and other textures possible combination with other special bases.

• For a thick layer of paint, use a high stencil with a thick application of capillary films.

• To study fine detail print with a good watering and hire at a moderate speed.

 

Special recommendation


• Test for drying are required prior to beginning the print run. Insufficient or excessive drying will result in poor stability of the print to wash, and poor adhesion of paint. The temperature on the surface of the impression with intermediate and final drying must be monitored with a pyrometer or other means.

• Responsibility for the correct selection of paint to a printing material lying on the technologist or the printer responsible for making paint and printing options.

• Test before launch into production. Improper drying of the paint may cause poor resistance to washing, insufficient adhesion, unacceptable durability and increased likelihood of dye migration.

• Supplement too many Kohler pigment or ink can lead to a change in printing properties.

• Change the drying temperature during printing will affect the surface texture and the tactile sensation of print.

• Stir the product before printing.

• The printed image cannot be subjected to dry cleaning, bleaching, and Ironing with a hot iron.

• For any application not referred in this manual, necessary to carry out preliminary tests or to consult a specialist.

Close