Desktop manual stencil machines for graphic printing

 

Characteristics

Model 1 2 3 4
Type of drive manual manual manual manual
Number of printing units, units 1 1 1 1
Number of printed tables, pieces 1 1 1 -
Max. print size, mm 150 х 250 250 х 350 350 х 550 400 х 600
Max. size of the printed frame, mm 300 х 400 400 х 500 500 х 700 600 х 850
Table size, mm 230 х 320 320 х 440 450 х 600 -
Maximum height, mm 110 110 110 110
Speed, cycle / change to 1500 to 1500 to 1500 to 1500

Description

Hand desktop printing machines are designed for sealing sheet materials such as leather, paper, cardboard, adhesive tape, various kinds of plastics, wood, metal, glass, plastic bags, etc.

Manual stencil machine Standard accessories:

• Metal plate table.

• Clip, which is equipped with rigid holders screw securing the printing frame in 3 points. Securely hold the frame holders, which prevents printing during its displacement and mobility, as well as to prevent re- alignment. Side clamp is able to capture the frame profile thickness up to 40 mm.

• Micrometer Register, which allows to center the printed form in all directions relative to the stencil plate.

• Turn the height from which it is possible lifting frames printed on the table, allowing you to seal the sheet thickness of 110 mm.

• Velcro coersion. Allowing secure the PCA after centering screen frame.

• Metal counterweights to lift the screen form.

• Model 4 represents a printing unit that can be mounted on any Desk.

Close