Spray adhesive to secure the product on the printing table Mecosol Thermoplus




Mecosol Thermoplus - sprayed adhesive containing no ftorhloristyh hydrocarbons. The main area of application is the fixation of tissues on the table during the printing process. Mecosol Thermoplus particularly suitable for the "Instant-on". In addition, it can be used to equip the self-adhesive layer of paper, cardboard, textiles and many other artificial materials.

With Mecosol Thermoplus available adhesive film with excellent adhesion on many different kinds of substrates. With an adhesive as an aid for positioning in textile printing is possible continued use on turning machines without spraying.

Easy to administer from the spray makes it easy to get the adhesive layer thicknesses and thus adhesion vary within certain limits. Because of the very high content of active components is sufficient, as a rule, even a short spray on the surface in order to achieve good adhesive strength.


Shake the can before use and spray from a distance of 20-30 cm

To connect apply glue to the printed board and allow it to evaporate for approx. 10-15 min., Then connect with the product. Thus, the adhesive Mecosol Thermoplus used to secure the fabric to the printing table.


STORAGE. 12 months (at 20-25 ° C).