Matte UV varnish for screen printing

   

 

Characteristics

Series
U 1117
U 6810
U 6036-60
Gloss
no
no
no
Viscosity (DIN 4 at 25 o C), h
50
50
60
The density of the printed material, g/m2
not less than 115*
not less than 115*
not less than 115*
The rate of drying
medium
excellent
excellent
Polymerization, power W/cm
120
80
120
Recommended mesh, neath/cm
140-180
140-180
140-180
Foil stamping\gluing
not suitable
not suitable
not suitable
Resistance to alcohol, alkali
excellent
excellent
excellent
Use
paper, cardboard
paper, cardboard, treated PE, film, foil
PVC panel
* the recommendations in the table are for guidance only and corresponds to our present knowledge and shall inform about our products and their technological applications.

Description

Matte UV varnish provides good protective properties and a uniform opaque layer.

Designed for coating on different varieties of cardboard and paper, treated polyethylene, as well as on films and foils. For indirect contact with food.

Note

Before using the varnish should be mixed thoroughly.

The presence of amines in the UV varnishes, under certain conditions, may cause spreading (change) of certain colors (recommended to test). For best results, paint must be resistant to the solvent mixture and schelocheustoychivymi (according to DIN 16524 \ 25), with a low wax content.

The varnish should not be in contact with the skin. Work in a well-ventilated area.

Storage

12 months at + 5º-30°C. Protect from cold and direct sunlight.

Close