Paint pad printing with solvent Maraprop PP

 

 


Maraprop PP pad printing ink is designed for printing on pre-treated and some types of untreated polypropylene.

Silky-glossy paint Maraprop PP, mainly used for printing on polypropylene, especially on polypropylene materials such as, for example, Priplak, Akylux and others. In most cases, it is possible to print on untreated polypropylene, so there is no need for pre-treatment with flame, corona discharge or a special substance for pre-treatment of the surface.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE, HKS, and RAL. All color shades can be mixed with each other in any combination. It is necessary to avoid mixing with other grades of paints to keep special properties of Maraprop PP.


Application features

suitable for untreated PP / very elastic and resistant to bending

Type (paint)

solvent pad printing ink

Drying speed

fast

The degree of gloss

silky-glossy

Covering capacity

average

Resistance to external environment

average

Application

pad printing / screen printing / graphic printing

Printed materials

untreated and treated polypropylene (pp) / treated polyethylene (pe)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Maraprop PP                        Color layout



PP 020
Pad printing ink PP 020
Glossy
Volume of 1l.

PP 021
Pad printing ink PP 021
Glossy
Volume of 1l.

PP 022
Pad printing ink PP 022
Glossy
Volume of 1l.

PP 033
Pad printing ink PP 033
Glossy
Volume of 1l.

PP 035
Pad printing ink PP 035
Glossy
Volume of 1l.

PP 036
Pad printing ink PP 036
Glossy
Volume of 1l.

PP 045
Pad printing ink PP 045
Glossy
Volume of 1l.

PP 055
Pad printing ink PP 055
Glossy
Volume of 1l.

PP 058
Pad printing ink PP 058
Glossy
Volume of 1l.


PP 059
Pad printing ink PP 059
Glossy
Volume of 1l.

PP 067
Pad printing ink PP 067
Glossy
Volume of 1l.

PP 068
Pad printing ink PP 068
Glossy
Volume of 1l.

PP 070
Pad printing ink PP 070
Glossy
Volume 1 and 5l.

PP 073
Pad printing ink PP 073
Glossy
Volume 1 and 5l.

PP 170
Pad printing ink PP 170
Glossy
Volume of 1l.

PP 180
Pad printing ink PP 180
Glossy
Volume of 1l.



Further shades


PP 902
Pad printing ink PP 902
Glossy
Volume of 1l.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Jet thinner PPTPV

PPTP - a special solvent is added to the paint before use to adjust its properties such as viscosity and spreading before pad printing, as well as for the use of a sprayer.

Additive - 20-25%

Unit of measure: 1l.

Thinner QNV

QNV is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 15-20%

Unit of measure: 1l.

Thinner soft UKV1

UKV1 is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 15-20%

Unit of measure: 1l. and 5l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-15%

Unit of measure: 1l. and 5l.

ES flow improver

ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing.

Additive - 0,5-1%

Unit of measure: 0,1l.

Mattifying powder МР

MP matting powder, matting is used for screen printing or pad printing inks with no loss in opacity. Supplement powder the IR is not making a colorful mixture of extraneous binder. Therefore, the properties of the paint remain unchanged.

Additive - 1-4%

Unit of measure: 1l.

Antistatic paste AP

AP - anti-static paste, used to reduce the impact of static charge on the paint. The paste reduces the viscosity of the paint and due to non-polar particles eliminates the typical phenomenon of "stretching threads"when printing.

Additive - 1-15%

Unit of measure: 1l.

Primer P2

P2 is a special primer used for manual pretreatment of polypropylene.

Unit of measure: 1l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with lacquer PP 902, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the large size of the pigments, we recommend using a 25-30 µm depth rasterized cliche when printing with metal powders.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish PP 902.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 12,5%
Volume of 1 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close