Paint for screen printing with solvent Maraprop PP

 

 


Paint for screen printing Maraprop PP is designed for printing on pre-treated and some kinds of raw polypropylene.

Silky-gloss paint Maraprop PP, mainly used for printing on PP, especially in such polypropylene materials, such as, Priplak, Akylux and others. In most cases, can be printed on untreated polypropylene, so there is no need for pre-treatment of the flame, corona discharge or a special agent for the pretreatment of the surface.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Maraprop PP.


Application features

suitable for untreated PP / very elastic and resistant to bending

Type (paint)

solvent-based screen printing ink

Drying speed

fast

The degree of gloss

silky-glossy

Covering capacity

average

Resistance to external environment

average

Application

screen printing / graphic printing / pad printing

Printed materials

untreated and treated polypropylene (pp) / treated polyethylene (pe)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Maraprop PP                        Color layout



PP 020
Screen paint PP 020
Glossy
Volume of 1l.

PP 021
Screen paint PP 021
Glossy
Volume of 1l.

PP 022
Screen paint PP 022
Glossy
Volume of 1l.

PP 033
Screen paint PP 033
Glossy
Volume of 1l.

PP 035
Screen paint PP 035
Glossy
Volume of 1l.

PP 036
Screen paint PP 036
Glossy
Volume of 1l.

PP 045
Screen paint PP 045
Glossy
Volume of 1l.

PP 055
Screen paint PP 055
Glossy
Volume of 1l.

PP 058
Screen paint PP 058
Glossy
Volume of 1l.


PP 059
Screen paint PP 059
Glossy
Volume of 1l.

PP 067
Screen paint PP 067
Glossy
Volume of 1l.

PP 068
Screen paint PP 068
Glossy
Volume of 1l.

PP 070
Screen paint PP 070
Glossy
Volume 1 and 5l.

PP 073
Screen paint PP 073
Glossy
Volume 1 and 5l.

PP 170
Screen paint PP 170
Glossy
Volume of 1l.

PP 180
Screen paint PP 180
Glossy
Volume of 1l.



Further shades


PP 902
Screen paint PP 902
Glossy
Volume of 1l.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Jet thinner PPTPV

PPTPV - a special solvent is added to the paint before use to adjust its properties such as viscosity and spreading before pad printing, as well as for the use of a sprayer.

Additive - 20-25%

Unit of measure: 1l.

Thinner QNV

QNV is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 15-20%

Unit of measure: 1l.

Thinner soft UKV1

UKV1 is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 15-20%

Unit of measure: 1l. and 5l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-15%

Unit of measure: 1l. and 5l.

ES flow improver

ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing.

Additive - 0,5-1%

Unit of measure: 0,1l.

Mattifying powder МР

MP matting powder, matting is used for screen printing or pad printing inks with no loss in opacity. Supplement powder the IR is not making a colorful mixture of extraneous binder. Therefore, the properties of the paint remain unchanged.

Additive - 1-4%

Unit of measure: 1l.

Antistatic paste AP

AP - anti-static paste, used to reduce the impact of static charge on the paint. The paste reduces the viscosity of the paint and due to non-polar particles eliminates the typical phenomenon of "stretching threads"when printing.

Additive - 1-15%

Unit of measure: 1l.

Primer P2

P2 is a special primer used for manual pretreatment of polypropylene.

Unit of measure: 1l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with lacquer PP 902, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the larger size of solid particles in metal powders should choose a coarser mesh, for example, 100.40.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish PP 902.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 12,5%
Volume of 1 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close