Luminescent Screen Printing Maraglow GW

 

 

 


Fluorescent paint for screen printing Maraglow GW is used for printing on PVC, polystyrene, ABS and SAN plastics, acrylic glass PMMA, polycarbonate PC, butcher paper and cardboard.

The paint accumulates ultraviolet rays (light) and emits it for an extended period of time. The effect of this radiation is manifested in the dark. Suitable for making evacuation plans and marking hazardous areas, both indoor and outdoor. It can be used for printing on self-adhesive materials and plates in the production of advertising and toys.

The Maraglow GW 760 shade can also be used in pad printing, if necessary.


Application features

soft odor / different duration of residual glow

Type (paint)

solvent screen printing ink

Drying speed

slow

The degree of gloss

matt

Covering capacity

low

Resistance to external environment

high

Application

silk screen printing / graphic printing

Printed materials

paper / cardboard / ABS and SAN plastic / rigid pvc / acrylic glass (pmma) / self-adhesive pvc / polystyrene (ps) / polycarbonate (pc)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Maraglow GW



GW 361
Screen paint GW 361
Matte
Volume of 1kg.

GW 760
Screen paint GW 760
Matte
Volume of 1kg.

GW 761
Screen paint GW 761
Matte
Volume of 1kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner soft UKV1

UKV1 is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 5%

Unit of measure: 1l. and 5l.

Thinner soft UKV2

UKV2 is a universal diluent, added to the paint before use to adjust its properties before printing, in particular viscosity and spreading. More environmentally friendly, has a higher evaporation rate than UKV1.

Additive - 5%

Unit of measure: 1l. and 5l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 5%

Unit of measure: 1l. and 5l.

ES flow improver

ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing.

Additive - 0,5-1%

Unit of measure: 0,1l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.

Close