Paint for screen printing with solvent Maragloss GO
![]() |
![]() |
Paint for screen printing on self adhesive films made of PVC, soft and rigid PVC, polycarbonate, PETG, PETA acrylic glass, but also on thick paper, folders, cardboard and wood.
Maragloss GO universal and elastic variety of inks for numerous applications and grades of materials to print with a speed of 600 prints per hour. Due to the high elasticity of the paint layer Maragloss GO suitable for molding materials, when printing on which the paint layer can crack or after printing on the colorful layer should be formed.
Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Maragloss GO.
Application features |
highly elastic paint layer / deep drawing capability / fluorescent shades |
Type (paint) |
solvent-based 1-component screen printing ink |
Drying speed |
fast |
The degree of gloss |
glossy |
Covering capacity |
high |
Resistance to external environment |
average |
Application |
silk screen printing / graphic printing |
Printed materials |
wood / paper / cardboard / pvc self-adhesive film / polyester (petg, pet) / polycarbonate (pc) / acrylic glass (pmma) / soft pvc |
Manufacturer |
Marabu (Germany) |
Detailed description paints Marabu Maragloss GO
Color layout
GO 020
Glossy
Volume of 1l.
GO 021
Glossy
Volume of 1l.
GO 022
Glossy
Volume of 1l.
GO 026
Glossy
Volume of 1l.
GO 031
Glossy
Volume of 1l.
GO 032
Glossy
Volume of 1l.
GO 033
Glossy
Volume of 1l.
GO 035
Glossy
Volume of 1l.
GO 036
Glossy
Volume of 1l.
GO 037
Glossy
Volume of 1l.
GO 045
Glossy
Volume of 1l.
GO 055
Glossy
Volume of 1l.
GO 057
Glossy
Volume of 1l.
GO 058
Glossy
Volume of 1l.
GO 059
Glossy
Volume of 1l.
GO 064
Glossy
Volume of 1l.
GO 067
Glossy
Volume of 1l.
GO 068
Glossy
Volume of 1l.
GO 070
Glossy
Volume of 1l.
GO 073
Glossy
Volume of 1l.
GO 170
Glossy
Volume of 1l.
Fluorescent shades
GO 320
Glossy
Volume of 1l.
GO 323
Glossy
Volume of 1l.
GO 331
Glossy
Volume of 1l.
GO 333
Glossy
Volume of 1l.
GO 364
Glossy
Volume of 1l.
Further shades
GO 910
Glossy
Volume of 1l.
* these shades are for reference and may differ from the actual ones depending on the screen setting.
![]() |
Thinner QNV QNV is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading. Additive - 10-25% Unit of measure: 1l. |
![]() |
Jet thinner 7037 7037 - universal jet solvent for use with stencil paints Marabu, where it is required to apply images using airbrush on awnings and other fabric surfaces of large format. The maximum additive is 40%. Unit of measure: 5l. |
![]() |
Soft retarder SV1 SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack). Additive - 10-15% Unit of measure: 1l. and 5l. |
![]() |
Slow retarder SV 9 SV9 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack). Additive - 1-5% Unit of measure: 1l. and 5l. |
![]() |
VP retarding paste VP - paste retarder is added to the paint in the case when the addition of solvent and retarder is no longer possible, and the paint still dries quickly. ONLY applies to one component pad and screen printing inks. Additive - 5-20% Unit of measure: 1l. |
![]() |
Plasticizer WM1 WM1 - plasticizer is recommended when the paint layer should be particularly elastic. This is especially important for thin printed materials that tend to twist, as well as when the printed paint layer will then be cut or embossed. Exception series Maraprop PP. Additive - 2-5% Unit of measure: 1l. |
![]() |
ES flow improver ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing. Additive - 0,5-1% Unit of measure: 0,1l. |
![]() |
UR3/ UR4 cleaner UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint. Unit of measure: 5l. |
Metallics are mixed with lacquer GO 910, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.
![]() |
Metallic powders Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the larger size of solid particles in metal powders should choose a coarser mesh, for example, 100.40. Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish GO 910. |
S 181
Silver
Additive 17%
Volume of 1 kg.
S 182
Gold
Additive 25%
Volume of 1 kg.
S 183
Gold
Additive 25%
Volume of 1 kg.
S 184
Gold
Additive 25%
Volume of 1 kg.
S 186
Copper
Additive 32%
Volume of 1 kg.
S 190
Silver
Additive 12,5%
Volume of 1 kg.
![]() |
Metallic pastes Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. To print mixtures with pasta-Metallica we recommend you to use a finer mesh, for example, to 150.31 140.31. |
S 191
Silver
Additive 15-25%
Volume of 0.2 kg.
S 192
Gold
Additive 15-25%
Volume of 0.2 kg.
S 193
Gold
Additive 15-25%
Volume of 0.2 kg.
S 291
Silver
Additive 10-20%
Volume of 0.2 kg.
S 292
Gold
Additive 10-20%
Volume of 0.2 kg.
S 293
Gold
Additive 10-20%
Volume of 0.2 kg.
* these shades are for reference and may differ from the actual ones depending on the screen setting.