Paint for screen printing on textiles based on solvent Maraflor TK

 

 

 


Matte, high-covering two-component paint for screen printing Maraflor TK, suitable for printing on textiles made of synthetic fibers, polyester, polyacrylic, polyurethane foams, as well as cotton and other blended fabrics. For the manufacture of Maraflor TK pigments are used with very high light resistance. Thus, the paint is intended for long-term use in the external environment.

Maraflor TK is a two-component paint and is very well suited for printing on umbrellas, jackets, work clothes made of synthetic materials, i.e. those materials that can not be printed with water-based paints.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Maraflor TK.


Application features

synthetic fabric paint / elastic paint coat / washing resistance up to 60°C / light-resistant pigmentation

Type (paint)

solvent-based 2-component screen printing ink

Drying speed

average

The degree of gloss

matte

Covering capacity

high

Resistance to external environment

average

Application

silk screen printing

Printed materials

textile / cotton / synthetic / polyamide (pa)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Maraflor TK                        Color layout



TK 920
Screen paint TK 920
Matte
Volume of 1kg.

TK 922
Screen paint TK 922
Matte
Volume of 1kg.

TK 924
Screen paint TK 924
Matte
Volume of 1kg.

TK 926
Screen paint TK 926
Matte
Volume of 1kg.

TK 930
Screen paint TK 930
Matte
Volume of 1kg.

TK 932
Screen paint TK 932
Matte
Volume of 1kg.

TK 934
Screen paint TK 934
Matte
Volume of 1kg.

TK 936
Screen paint TK 936
Matte
Volume of 1kg.

TK 940
Screen paint TK 940
Matte
Volume of 1kg.


TK 950
Screen paint TK 950
Matte
Volume of 1kg.

TK 952
Screen paint TK 952
Matte
Volume of 1kg.

TK 954
Screen paint TK 954
Matte
Volume of 1kg.

TK 956
Screen paint TK 956
Matte
Volume of 1kg.

TK 960
Screen paint TK 960
Matte
Volume of 1kg.

TK 962
Screen paint TK 962
Matte
Volume of 1kg.

TK 970
Screen paint TK 970
Matte
Volume of 1kg.

TK 980
Screen paint TK 980
Matte
Volume of 1kg.

TK 170
Screen paint TK 170
Matte
Volume of 1kg.



Further shades


TK 902
Screen paint TK 902
Matte
Volume of 1kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner soft UKV1

UKV1 is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 10-15%

Unit of measure: 1l. and 5l.

Thinner soft UKV2

UKV2 is a universal diluent, added to the paint before use to adjust its properties before printing, in particular viscosity and spreading. More environmentally friendly, has a higher evaporation rate than UKV1.

Additive - 10-15%

Unit of measure: 1l. and 5l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-15%

Unit of measure: 1l. and 5l.

Hardener H2

H2 - hardener, added to give the paint layer better stability and adhesion. The hardener should be thoroughly and evenly mixed in the paint. The mixture of paint and hardener is unstable and must be recycled within 4 hours.

Additive - 10%

Unit of measure: 0,1l and 0,2l.

Thixotropic agent STM

STM - thixotropic agent, serves to increase the hiding power of the paint. It is used, for example, when printing thin lines in the positive and negative printing area, with relief printing. Not applicable where high flexibility of the paint layer, deep drawing is required.

Additive - 1-2%

Unit of measure: 1l. and 5l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with lacquer TK 902, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the larger size of solid particles in metal powders should choose a coarser mesh, for example, 100.40.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish TK 902.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 182
Metallic powder S 182
Gold
Additive 25%
Volume of 1 kg.

S 183
Metallic powder S 183
Gold
Additive 25%
Volume of 1 kg.

S 184
Metallic powder S 184
Gold
Additive 25%
Volume of 1 kg.

S 186
Metallic powder S 186
Copper
Additive 32%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 12,5%
Volume of 1 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close