Paint for screen printing with solvent Maraflex FX

 

 

 


Paint for screen printing Maraflex FX used for printing on PVC - films and ABS - and PVC - plastic. Also paint Maraflex FX has limited applicability to the press on polycarbonate (PC) and PET-G. On this material to produce proof prints.

Paint Maraflex FX is suitable for printing single and multi-layer identification cards, such as loyalty cards, club, bank, telephone or ID cards, etc. After drying the paint perfectly amenable lamination and can be used in combination with other types of printing (offset, UV - varnishing) and finishing processes (hot stamping).

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Maraflex FX.


Application features

very elastic paint layer / possibility of stamping and laser processing / very good laminating ability

Type (paint)

solvent screen printing ink

Drying speed

fast

The degree of gloss

silky-glossy

Covering capacity

average

Resistance to external environment

average

Application

silk screen printing / printing bank / plastic / id cards / graphic printing

Printed materials

pvc film / ABS and SAN plastic / rigid pvc / polycarbonate (pc) / polyester film (lavsan)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Maraflex FX                        Color layout



FX 920
Screen paint FX 920
Glossy
Volume of 1l.

FX 922
Screen paint FX 922
Glossy
Volume of 1l.

FX 924
Screen paint FX 924
Glossy
Volume of 1l.

FX 926
Screen paint FX 926
Glossy
Volume of 1l.

FX 930
Screen paint FX 930
Glossy
Volume of 1l.

FX 932
Screen paint FX 932
Glossy
Volume of 1l.

FX 934
Screen paint FX 934
Glossy
Volume of 1l.

FX 936
Screen paint FX 936
Glossy
Volume of 1l.

FX 940
Screen paint FX 940
Glossy
Volume of 1l.


FX 950
Screen paint FX 950
Glossy
Volume of 1l.

FX 952
Screen paint FX 952
Glossy
Volume of 1l.

FX 954
Screen paint FX 954
Glossy
Volume of 1l.

FX 956
Screen paint FX 956
Glossy
Volume of 1l.

FX 960
Screen paint FX 960
Glossy
Volume of 1l.

FX 962
Screen paint FX 962
Glossy
Volume of 1l.

FX 970
Screen paint FX 970
Glossy
Volume of 1l.

FX 980
Screen paint FX 980
Glossy
Volume of 1l.

FX 170
Screen paint FX 170
Glossy
Volume of 1l.



Metallics


FX 191
Screen paint FX 191
Glossy
Volume of 1l.

FX 195
Screen paint FX 195
Glossy
Volume of 1l.

FX 197
Screen paint FX 197
Glossy
Volume of 1l.

FX 199
Screen paint FX 199
Glossy
Volume of 1l.



Transparent shades


FX 520
Screen paint FX 520
Glossy
Volume of 1l.

FX 536
Screen paint FX 536
Glossy
Volume of 1l.



Further shades


FX 903
Screen paint FX 903
Glossy
Volume of 1l.

FX 904
Screen paint FX 904
Glossy
Volume of 1l.

FX 910
Screen paint FX 910
Glossy
Volume of 1l.

FX 913
Screen paint FX 913
Glossy
Volume of 1l.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner soft UKV1

UKV1 is a universal diluent, added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 10-15%

Unit of measure: 1l. and 5l.

Thinner soft UKV2

UKV2 is a universal diluent, added to the paint before use to adjust its properties before printing, in particular viscosity and spreading. More environmentally friendly, has a higher evaporation rate than UKV1.

Additive - 10-15%

Unit of measure: 1l. and 5l.

Slow retarder SV 10

SV10 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-15%

Unit of measure: 1l. and 5l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with varnish FX 904, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours.


Metallic pastes

Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. To print mixtures with pasta-Metallica we recommend you to use a finer mesh, for example, to 150.31 140.31.


S 191
Metallized paste S 191
Silver
Additive 15-25%
Volume of 0.2 kg.

S 192
Metallized paste S 192
Gold
Additive 15-25%
Volume of 0.2 kg.

S 193
Metallized paste S 193
Gold
Additive 15-25%
Volume of 0.2 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close