Matte screen printing inks solvent-based Libramatt LIM

 

 

 


Matte screen printing inks Libramatt LIM is used for printing on hard and soft PVC, self-adhesive film of PVC, polystyrene, acrylic glass and polycarbonate. These materials need to produce proofs.

Libramatt LIM is a universal matt paint and is used wherever the highest requirements for opacity, flexibility, or resistance to plasticizers: scale, instrument panels, nameplates, intermediate paint double labels, printing, application of paint roller or spray tents PVC pressing and sticking to acrylic glass. Print tents for trucks, we recommend paint Maraplan PL.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Libramatt LIM.


Application features

matt ink with very mild odour / very good behavior in the printing / very high opacity

Type (paint)

solvent screen printing ink

Drying speed

fast

The degree of gloss

matt

Covering capacity

high

Resistance to the external environment

high

Application

silk screen printing / graphic printing

Printed materials

wood / paper / cardboard / PVC self-adhesive film / polystyrene (ps) / polycarbonate (pc) / acrylic glass (pmma) / soft pvc / polyester film (dacron)

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Libramatt LIM                        Color layout



LIM 920
Screen paint LIM 920
Matte
Volume of 1l.

LIM 922
Screen paint LIM 922
Matte
Volume of 1l.

LIM 924
Screen paint LIM 924
Matte
Volume of 1l.

LIM 926
Screen paint LIM 926
Matte
Volume of 1l.

LIM 930
Screen paint LIM 930
Matte
Volume of 1l.

LIM 932
Screen paint LIM 932
Matte
Volume of 1l.

LIM 934
Screen paint LIM 934
Matte
Volume of 1l.

LIM 936
Screen paint LIM 936
Matte
Volume of 1l.

LIM 940
Screen paint LIM 940
Matte
Volume of 1l.


LIM 950
Screen paint LIM 950
Matte
Volume of 1l.

LIM 952
Screen paint LIM 952
Matte
Volume of 1l.

LIM 954
Screen paint LIM 954
Matte
Volume of 1l.

LIM 956
Screen paint LIM 956
Matte
Volume of 1l.

LIM 960
Screen paint LIM 960
Matte
Volume of 1l.

LIM 962
Screen paint LIM 962
Matte
Volume of 1l.

LIM 970
Screen paint LIM 970
Matte
Volume of 1l.

LIM 980
Screen paint LIM 980
Matte
Volume of 1l.

LIM 170
Screen paint LIM 170
Matte
Volume of 1l.


LIM 180
Screen paint LIM 180
Matte
Volume of 1l.

LIM 182
Screen paint LIM 182
Matte
Volume of 1l.

LIM 570
Screen paint LIM 570
Matte
Volume of 1l.



Further shades


LIM 409
Screen paint LIM 409
Matte
Volume of 1l.

LIM 910
Screen paint LIM 910
Matte
Volume of 1l.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner soft UKV2

UKV2 is a universal diluent, added to the paint before use to adjust its properties before printing, in particular viscosity and spreading. More environmentally friendly, has a higher evaporation rate than UKV1.

Additive-10-20%

Unit of measure: 1 l. and 5 l.

Jet thinner 7037

7037 - universal jet solvent for use with stencil paints Marabu, where it is required to apply images using airbrush on awnings and other fabric surfaces of large format.

The maximum additive is 40%.

Unit of measure: 5 l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive-10-20%

Unit of measure: 1 l. and 5 l.

Slow retarder SV9

SV9 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-20%

Unit of measure: 1 l. and 5 l.

VP retarding paste

VP - paste retarder is added to the paint in the case when the addition of solvent and retarder is no longer possible, and the paint still dries quickly. ONLY applies to one component pad and screen printing inks.

Additive - 10-20%

Unit of measure: 1 l.

Plasticizer WM1

WM1 - plasticizer is recommended when the paint layer should be particularly elastic. This is especially important for thin printed materials that tend to twist, as well as when the printed paint layer will then be cut or embossed. Exception series Maraprop PP.

Additive-2-5%

Unit of measure: 1 l.

ES flow improver

ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing.

Additive-0,5-1%

Unit of measure: 0,1 l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5 l.


Metallics are mixed with lacquer LIM 910, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the larger size of solid particles in metal powders should choose a coarser mesh, for example, 100.40.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish LIM 910.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 182
Metallic powder S 182
Gold
Additive 25%
Volume of 1 kg.

S 183
Metallic powder S 183
Gold
Additive 25%
Volume of 1 kg.

S 184
Metallic powder S 184
Gold
Additive 25%
Volume of 1 kg.

S 186
Metallic powder S 186
Copper
Additive 25%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 25%
Volume of 1 kg.

 

Metallic pastes

Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. To print mixtures with pasta-Metallica we recommend you to use a finer mesh, for example, to 150.31 140.31.


S 291
Metallized paste S 291
Silver
Additive 10-20%
Volume of 0.2 kg.

S 292
Metallized paste S 292
Gold
Additive 10-20%
Volume of 0.2 kg.

S 293
Metallized paste S 293
Gold
Additive 10-20%
Volume of 0.2 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close