Paint for screen printing with solvent Libragloss LIG

 

 

 


Paint for screen printing Libragloss LIG used for printing on rigid polyvinyl chloride (PVC), self-adhesive PVC film, polystyrene (PS), ABS and SAN plastics (ABS, SAN), polycarbonate (PC), acrylic glass (PMMA), paper (including Hromolyuks), cardboard and wood.

Libragloss LIG - gloss paint for screen printing with high mesh opening is a universal ink for use in manual as well as in high-speed printing (up to 1,000 rentals per hour). Possible areas of application - stickers, labels, posters, advertising panels, invitations, business cards, letterheads and more.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Libragloss LIG.


Application features

very good behavior in printing and easy way of working / soft smell / paint from raster kit with very good permeability through the sieve / suitable for parts made by injection molding

Type (paint)

solvent-based screen printing ink

Drying speed

fast

The degree of gloss

glossy

Covering capacity

average

Resistance to external environment

average

Application

silk screen printing / graphic printing

Printed materials

wood / paper / cardboard / pvc self-adhesive film / polystyrene (ps) / polycarbonate (pc) / acrylic glass (pmma) / soft pvc

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Libragloss LIG                        Color layout



LIG 020
Screen paint LIG 020
Glossy
Volume of 1l.

LIG 021
Screen paint LIG 021
Glossy
Volume of 1l.

LIG 022
Screen paint LIG 022
Glossy
Volume of 1l.

LIG 026
Screen paint LIG 026
Glossy
Volume of 1l.

LIG 031
Screen paint LIG 031
Glossy
Volume of 1l.

LIG 032
Screen paint LIG 032
Glossy
Volume of 1l.

LIG 033
Screen paint LIG 033
Glossy
Volume of 1l.

LIG 035
Screen paint LIG 035
Glossy
Volume of 1l.

LIG 036
Screen paint LIG 036
Glossy
Volume of 1l.


LIG 037
Screen paint LIG 037
Glossy
Volume of 1l.

LIG 045
Screen paint LIG 045
Glossy
Volume of 1l.

LIG 055
Screen paint LIG 055
Glossy
Volume of 1l.

LIG 056
Screen paint LIG 056
Glossy
Volume of 1l.

LIG 057
Screen paint LIG 057
Glossy
Volume of 1l.

LIG 058
Screen paint LIG 058
Glossy
Volume of 1l.

LIG 059
Screen paint LIG 059
Glossy
Volume of 1l.

LIG 064
Screen paint LIG 064
Glossy
Volume of 1l.

LIG 067
Screen paint LIG 067
Glossy
Volume of 1l.


LIG 068
Screen paint LIG 068
Glossy
Volume of 1l.

LIG 070
Screen paint LIG 070
Glossy
Volume of 1l.

LIG 073
Screen paint LIG 073
Glossy
Volume of 1l.



4-colour process shades


LIG 429
Screen paint LIG 429
Glossy
Volume of 1l.

LIG 439
Screen paint LIG 439
Glossy
Volume of 1l.

LIG 459
Screen paint LIG 459
Glossy
Volume of 1l.

LIG 473
Screen paint LIG 473
Glossy
Volume of 1l.



Pantone® basic shades


LIG 829
Screen paint LIG 829
Glossy
Volume of 1l.

LIG 832
Screen paint LIG 832
Glossy
Volume of 1l.

LIG 836
Screen paint LIG 836
Glossy
Volume of 1l.

LIG 839
Screen paint LIG 839
Glossy
Volume of 1l.

LIG 850
Screen paint LIG 850
Glossy
Volume of 1l.

LIG 851
Screen paint LIG 851
Glossy
Volume of 1l.

LIG 852
Screen paint LIG 852
Glossy
Volume of 1l.

LIG 859
Screen paint LIG 859
Glossy
Volume of 1l.

LIG 868
Screen paint LIG 868
Glossy
Volume of 1l.



Further shades


LIG 409
Screen paint LIG 409
Glossy
Volume of 1l.

LIG 910
Screen paint LIG 910
Glossy
Volume of 1l.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner soft PSV

PSV – the universal thinner, is added to the paint prior to application is recommended when printing on polystyrene or other plastics sensitive to solvents. For spray coating additive up to 40%.

Additive - 10-15%

Unit of measure: 1l.

Thinner slow LIGV

LIGV - a special solvent added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 10-15%

Unit of measure: 1l.

Thinner soft UKV2

UKV2 is a universal diluent, added to the paint before use to adjust its properties before printing, in particular viscosity and spreading. More environmentally friendly, has a higher evaporation rate than UKV1.

Additive - 10-15%

Unit of measure: 1l. and 5l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-15%

Unit of measure: 1l. and 5l.

Slow retarder SV 9

SV9 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 1-5%

Unit of measure: 1l. and 5l.

VP retarding paste

VP - paste retarder is added to the paint in the case when the addition of solvent and retarder is no longer possible, and the paint still dries quickly. ONLY applies to one component pad and screen printing inks.

Additive - 5-20%

Unit of measure: 1l.

Plasticizer WM1

WM1 - plasticizer is recommended when the paint layer should be particularly elastic. This is especially important for thin printed materials that tend to twist, as well as when the printed paint layer will then be cut or embossed. Exception series Maraprop PP.

Additive - 2-5%

Unit of measure: 1l.

ES flow improver

ES - means for spreading, serves to prevent the formation of bubbles in the paint during printing, due to the constant movement of the squeegee or intensive mixing.

Additive - 0,5-1%

Unit of measure: 0,1l.

Matting paste ABM

ABM - dulling paste, is a matting of the paint without losing covering ability. For 2-component pad printing or screen printing and UV-curable inks, use a matting powder Marabu MP.

Additive - 1-20%

Unit of measure: 1l.

Mattifying powder МР

MP matting powder, matting is used for screen printing or pad printing inks with no loss in opacity. Supplement powder the IR is not making a colorful mixture of extraneous binder. Therefore, the properties of the paint remain unchanged.

Additive - 1-4%

Unit of measure: 1l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with lacquer LIG 910, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the larger size of solid particles in metal powders should choose a coarser mesh, for example, 100.40.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish LIG 910.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 182
Metallic powder S 182
Gold
Additive 25%
Volume of 1 kg.

S 183
Metallic powder S 183
Gold
Additive 25%
Volume of 1 kg.

S 184
Metallic powder S 184
Gold
Additive 25%
Volume of 1 kg.

S 186
Metallic powder S 186
Copper
Additive 32%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 12,5%
Volume of 1 kg.

 

Metallic pastes

Metal pastes are used to obtain metallic shades by mixing the paste into transparent varnishes. To print mixtures with pasta-Metallica we recommend you to use a finer mesh, for example, to 150.31 140.31.


S 191
Metallized paste S 191
Silver
Additive 15-25%
Volume of 0.2 kg.

S 192
Metallized paste S 192
Gold
Additive 15-25%
Volume of 0.2 kg.

S 193
Metallized paste S 193
Gold
Additive 15-25%
Volume of 0.2 kg.

S 291
Metallized paste S 291
Silver
Additive 10-20%
Volume of 0.2 kg.

S 292
Metallized paste S 292
Gold
Additive 10-20%
Volume of 0.2 kg.

S 293
Metallized paste S 293
Gold
Additive 10-20%
Volume of 0.2 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close