Spray adhesive to secure the product on the printing table Kiwofix SX

 

 

Description

This spray adhesive, which can be used as a contact, mounting adhesives, pressure sensitive. Kiwofix SX is used for reliable gluing of paper, cardboard, felt, wood, metal, foam rubber, and a variety of plastics (including styrofoam). Kiwofix SX forms beige, slightly matte adhesive. Tiny drop of glue is evenly distributed over the surface of a thin layer, thus, Kiwofix SX is economical to use. Spray jet into the tiniest openings, which are not able to penetrate the liquid or pasty glue. After 24 hours, there is a final grip surfaces to be bonded.

Application

Shake the can before use and spray from a distance of 20-30 cm

To connect apply glue to the printed board and allow it to evaporate for approx. 10-15 min., Then connect with the product. Thus, the adhesive Kiwofix SX is used to secure the fabric to the printing table.

 

STORAGE. 12 months (at 20-25 ° C).

Close