Infrared (IR) tunnel drying for screen printing, Pro series



Model 1 2 3 4 5 6 7
Type of drive Electro Electro Electro Electro Electro Electro Electro
The length of the drying chamber, mm 1000 2000 3000 4000 2000 3000 4000
The width of the conveyor belt, mm 700 700 700 700 1000 1000 1000
Number of heating zones, units 1 3 3 3 3 3 3
Power, kW 4,5 8,20 12,20 16,20 12,2 16,20 20,20
Power supply, V 380 380 380 380 380 380 380
Dimensions (LxWxH), m 1,80х1,13х1,39 3,00х1,13х1,39 4,00х1,13х1,39 5,00х1,13х1,39 3,00х1,43х1,39 4,00х1,43х1,39 5,00х1,43х1,39


Infrared drying tunnel designed to finish drying stencil paints requiring heating temperature up to +180 C. They are mainly used to dye silk-screen printing on textile and transfer paper.

These tunnel drying areas have powerful IR heating. Heating sections are divided into three zones, which have pozonnoe emitters off to save power or to solve technological purposes drying products. IR heating section can be easily adjusted in height by the height adjuster.

The temperature inside the tunnel is controlled by a high precision digital temperature controller with setpoint and actual temperature. Digital display performs corrections IR heating sections, thus maintains the desired temperature inside the tunnel.

The ventilation system inside drying protected filter, which cuts off dust and debris in the textile drying cabinet, which is important for the output products of high quality. And also avoid costly cleaning service tunnel, and extend the life of the IR heating sections. The ventilation system is equipped with a hood so that the admission of air into the cabinet, it is distributed, cool wall of the body and creates an air barrier at entrances and output. Air barrier creates the most accurate given temperature zone inside the tunnel and prevents the effect of "draft."

Autonomous hood facilitates extraction of hot air and paint fumes caused inside the tunnel. Hood has a mechanical valve in the ventilation system, which regulates the pumping of heat and fumes what is important for different areas of exhaust systems.

Conveyor Teflon tape is made of heat-resistant material that can withstand temperatures up to 300 C. The movement of the conveyor belt drive adjustable with digital display, which provides infinitely variable speed control. The conveyor teflon tape moves along the shafts, the uniformity of tension of which is regulated by mechanical regulators.