Glossy UV varnish for screen printing

   

 

Characteristics

Series
U 1115-50
U 1161-60
U 1115-90
U 1115-120
U 1115-300
Gloss
85-95
85-95
85-95
85-95
85-95
Viscosity (DIN 4 at 25 o C), h
48-52
60
90
120
300
The density of the printed material, g/m2
not less than 115*
not less than 115*
not less than 115*
not less than 115*
not less than 115*
The rate of drying
medium
fast
medium
medium
medium
Polymerization, power W/cm
120
120
120
120
120
Recommended mesh, neath/cm
150-200
140-180
140-180
120-165
77-90
Foil stamping\gluing
not suitable
not suitable
not suitable
not suitable
not suitable
Resistance to alcohol, alkali
excellent
excellent
excellent
excellent
excellent
The degree of slip
excellent
excellent
excellent
excellent
excellent
* the recommendations in the table are for guidance only and corresponds to our present knowledge and shall inform about our products and their technological applications.

Description

Glossy UV varnish has a high gloss and excellent barrier properties. The special formula allows you to polish uniform gloss, economical in use.

Designed for painting on various grades of paper and cardboard, as well as on non-absorbent materials. For indirect food contact.

Note

Before using the varnish should be mixed thoroughly.

The presence of amines in the UV varnishes, under certain conditions, may cause spreading (change) of certain colors (recommended to test). For best results, paint must be resistant to the solvent mixture and schelocheustoychivymi (according to DIN 16524 \ 25), with a low wax content.

The varnish should not be in contact with the skin. Work in a well-ventilated area.

Storage

12 months at + 10º-25°C. Protect from cold and direct sunlight.

Close