Paint pad printing with solvent Glasfarbe GL

 

 

 


Paint Glasfarbe GL is mainly used for printing on glass and ceramics, especially for the decorating-tion perfume bottles or promotional products. This special paint and, unlike the other two-component systems, it has very good adhesion and high water. Also, this paint can be used on promotional products made ??of glass and ceramics, at moderate loads when washing.

Paint pad and screen printing Glasfarbe GL successfully used not only for printing on glass, but also in ceramics, metal, chrome, materials with different coatings and thermoplastics. Since all indications materials may differ in their properties (due to additives, etc.), it is recommended a test print to determine the suitability for the particular use.

Of the color shades, using an electronic mixing system Marabu-ColorManager (MCM), you can get all known color systems PANTONE®, HKS®, and RAL®. All color shades can be mixed with each other in any combination. Avoid mixing with other types of paints to preserve the special properties of Glasfarbe GL.


Application features

bright colors / high chemical resistance, resistance to fillers and dishwasher safe

Type (paint)

solvent-based 2-component pad printing ink

Drying speed

average

The degree of gloss

silky-glossy

Covering capacity

high

Resistance to external environment

limited

Application

pad printing / silk screen printing / graphic printing

Printed materials

ceramic / lacquered surfaces / glass / metals / anodized aluminum / duroplasts / powder coating

Manufacturer

Marabu (Germany)


Detailed description paints Marabu Glasfarbe GL                        Color layout



GL 020
Pad printing ink GL 020
Glossy
Volume of 1kg.

GL 021
Pad printing ink GL 021
Glossy
Volume of 1kg.

GL 022
Pad printing ink GL 022
Glossy
Volume of 1kg.

GL 032
Pad printing ink GL 032
Glossy
Volume of 1kg.

GL 035
Pad printing ink GL 035
Glossy
Volume of 1kg.

GL 036
Pad printing ink GL 036
Glossy
Volume of 1kg.

GL 045
Pad printing ink GL 045
Glossy
Volume of 1kg.

GL 055
Pad printing ink GL 055
Glossy
Volume of 1kg.

GL 057
Pad printing ink GL 057
Glossy
Volume of 1kg.


GL 058
Pad printing ink GL 058
Glossy
Volume of 1kg.

GL 064
Pad printing ink GL 064
Glossy
Volume of 1kg.

GL 068
Pad printing ink GL 068
Glossy
Volume of 1kg.

GL 070
Pad printing ink GL 070
Glossy
Volume of 1kg.

GL 073
Pad printing ink GL 073
Glossy
Volume of 1kg.

GL 273
Pad printing ink GL 273
Glossy
Volume of 1kg.



4-colour process shades


GL 429
Pad printing ink GL 429
Glossy
Volume of 1kg.

GL 439
Pad printing ink GL 439
Glossy
Volume of 1kg.

GL 459
Pad printing ink GL 459
Glossy
Volume of 1kg.

GL 473
Pad printing ink GL 473
Glossy
Volume of 1kg.



Metallics


GL 191
Pad printing ink GL 191
Glossy
Volume of 1kg.

GL 192
Pad printing ink GL 192
Glossy
Volume of 1kg.

GL 193
Pad printing ink GL 193
Glossy
Volume of 1kg.



Transparent shades


GL 525
Pad printing ink GL 525
Glossy
Volume of 1kg.

GL 535
Pad printing ink GL 535
Glossy
Volume of 1kg.

GL 555
Pad printing ink GL 555
Glossy
Volume of 1kg.

GL 565
Pad printing ink GL 565
Glossy
Volume of 1kg.



Further shades


GL 409
Pad printing ink GL 409
Glossy
Volume of 1kg.

GL 910
Pad printing ink GL 910
Glossy
Volume of 1kg.

GL 913
Pad printing ink GL 913
Glossy
Volume of 1kg.

GL 914
Pad printing ink GL 914
Glossy
Volume of 1kg.

GL 915
Pad printing ink GL 915
Glossy
Volume of 1kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.


Thinner GLV

GLV is a special solvent added to the paint before application to adjust its properties before screen printing in particular viscosity and spreading.

Additive - 5-10%

Unit of measure: 1l.

Jet thinner GLTPV

GLTPV is a special solvent added to the paint before application to adjust its properties before pad printing in particular viscosity and spreading.

Additive - 15-30%

Unit of measure: 1l.

Soft retarder SV1

SV1 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 10-15%

Unit of measure: 1l. and 5l.

Slow retarder SV 9

SV9 - universal retarder, added to the paint before use, significantly increasing the drying time of the paint if the work is carried out at slow printing speeds. Also reduce the resistance to adhesion of fingerprints (in the stack).

Additive - 1-5%

Unit of measure: 1l. and 5l.

Hardener GLH

GLH is a special hardener added to the paint just before printing. Susceptible to moisture and must be stored in a tightly closed container.

Additive - 5%

Unit of measure: 50 gr.

Print modifier VM1

VM1 - means for spreading, eliminates problems with spreading paint when working with hard-to-seal surfaces. Adding more can, on the contrary, complicate the spreading problem and lead to poor adhesion.

Additive - 0-1%

Unit of measure: 1l.

Matting powder MP

MP matting powder, matting is used for screen printing or pad printing inks with no loss in opacity. Supplement powder the IR is not making a colorful mixture of extraneous binder. Therefore, the properties of the paint remain unchanged.

Additive - 1-3%

Unit of measure: 1l.

UR3/ UR4 cleaner

UR3 and UR4 - universal cleaners are recommended for cleaning screen forms, working tools and printing tables from paint.

Unit of measure: 5l.


Metallics are mixed with lacquer GL 910, and the recommended amount of additives can be individually adjusted depending on the printing task. Since mixtures with metallics are not stable during storage, they need to be prepared in an amount that can be processed within 8 hours. Because of its chemical structure, the pale gold S 184 and copper S 186 reduce the working time with bronze shades to 4 hours.


Metallic powders

Metal powders are used to obtain metallic shades by mixing the powder into transparent varnishes. Due to the large size of the pigments, we recommend using a 25-30 µm depth rasterized cliche when printing with metal powders.

Shades, made of powders of metals exposed to the dry abrasion, therefore, to protect the imprint, recommended surface varnish GL 910.


S 181
Metallic powder S 181
Silver
Additive 17%
Volume of 1 kg.

S 182
Metallic powder S 182
Gold
Additive 25%
Volume of 1 kg.

S 183
Metallic powder S 183
Gold
Additive 25%
Volume of 1 kg.

S 184
Metallic powder S 184
Gold
Additive 25%
Volume of 1 kg.

S 186
Metallic powder S 186
Copper
Additive 32%
Volume of 1 kg.

S 190
Metallic powder S 190
Silver
Additive 12,5%
Volume of 1 kg.


* these shades are for reference and may differ from the actual ones depending on the screen setting.

Close