Polypropylene paper to print Eco-Sol Synthetic Paper ESP200B



Basis: polypropylene.

Density: 270 g/m².

Roll width: 91,4, 127 cm.

Roll length: 50 m.

Plating: semi-gloss.

Printing: solvent, latex, UV inks.

Application: Roll-up design manufacturer of POS products.

Manufacture: Korea.


Light aproposmedia polypropylene paper with a special coating for printing. Has high strength do not stretch and tear-resistant. Smooth surface provides high-quality printing, the image is bright and saturated. Ideal for Roll-up structures and production of POS products.


With digital printing it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

Recommended temperature when printing: 15-30°C recommended humidity 30-50%. Too high pre-heating temperature may lead to deterioration of print quality or the color difference. Recommended storage conditions: temperature of 10-25°C, humidity 20%.

After printing, the paper with the finished picture should be left in the expanded position on a flat, clean and dry the vertical surface to dry ink.