Translucent removable adhesive film Backlit film No.8 Eco solvent 1097

 

Specifications

Basis: PVC.

Density: 180 g/m².

Roll width: 107, 127, 152 cm.

Roll length: 50 m.

Surface: satin.

Printing: solvent, ecosolvent, UV inks.

Application: light design with internal illumination.

Manufacture: Korea.

Application

Translucent easy-glue-tape – plastic light-diffusing PVC film "economy" class c bluish tint satin finish. Film without adhesive layer. Film designed for high quality solvent & UV printing advertising graphics and its use in light constructions with internal lighting (light boxes, lightboxes, city formats, light signs, other designs of street and interior decorations). During printing, the film gives a clear, bright and rich image. Dries quickly.

Use

It is recommended to work with material in cotton gloves, to avoid contamination of the surface of the printed material.

It is not recommended to fold the film, the surface of the material may be damaged, the creases will remain.

Recommended temperature when printing: 15-30°C recommended humidity 30-50%. Too high pre-heating temperature may lead to deterioration of print quality or the color difference. Recommended storage conditions: temperature of 10-25°C, humidity 20%.

Recommendations for assembling the film:

Prepare the surface on which is installed protector – clear with water from dust and dirt.

Moisten the surface with water before installing the film (optional).

Remove the end face protective film and gently apply to the pasted over surface.

Align all sides of the tape and then slowly remove the substrate at the same time sticking the tape to the surface.

Smooth the film with a squeegee or rubber roller from the middle to the edges.

To align the film slowly move it on the surface.

Close