Light-diffusing film for print Eco Sol Backlite 215



Basis: PET.

Density: 275 g/m².

Roll width: 91,4, 127, 152 cm.

Roll length: 50 m.

Surface: white, glossy and matte.

Light transmission: 2,3%.

Printing: solvent, ecosolvent, UV inks.

Application: light design with internal illumination.

Manufacture: Korea.


Translucent PET film, specifically designed for colourful advertising works in light boxes. Film designed for high quality solvent & UV printing. Ideal for illuminated signage, provide with external lighting and illumination inside transfer maximum ink density, vivid color and high resolution. High print quality, quick drying, scratch resistant.


It is recommended to work with material in cotton gloves, to avoid contamination of the surface of the printed material.

It is not recommended to fold the film, the surface of the material may be damaged, the creases will remain.

Recommended temperature when printing: 15-30°C recommended humidity 30-50%. Too high pre-heating temperature may lead to deterioration of print quality or the color difference. Recommended storage conditions: temperature of 10-25°C, humidity 20%.

Recommendations for assembling the film:

Prepare the surface on which is installed protector – clear with water from dust and dirt.

Moisten the surface with water before installing the film (optional).

Remove the end face protective film and gently apply to the pasted over surface.

Align all sides of the tape and then slowly remove the substrate at the same time sticking the tape to the surface.

Smooth the film with a squeegee or rubber roller from the middle to the edges.

To align the film slowly move it on the surface.