Perforated film for printing BG One way vision vinyl 7104/7107



Basis: PVC.

Density: 150 µm.

Roll width: 127, 137, 152 cm.

Roll length: 50 m.

Hole diameter: 1.5 mm.

Perforation: the ratio of 40%.

Coating: front side white, back side black.

Adhesive: black.

Printing: solvent, eco-solvent, Lite-solvent and UV-curable ink.

Application: for gluing glass panes of vehicles, windows and other transparent surfaces.

Manufacture: China.


White perforated film c black adhesive layer. This film is designed for high quality solvent & UV printing advertising graphics. Used film for transparent glass surfaces (advertising on transport, advertising on the windows and the shop windows).

Perforation of the film provides one-sided (external) visibility, on the inner side of the room retained the appearance of the windows. Suitable for short and medium-term use on windows inside and outside.


Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The ideal temperature for installation of self-adhesive film of 20-22°C. the Decal film can be carried out only in dry condition!

To protect the perforation from the accumulation of moisture and ensure longer service life of the film is recommended to laminate the finished print.