Perforated film for printing 3676E



Basis: PVC.

Density: 140 µm.

Roll width: 137 cm.

Roll length: 50 m.

Hole diameter: 1.5 mm.

Perforation: the ratio of 40%.

Coating: front side white, back side black.

Adhesive: transparent.

Printing: solvent and latex inks.

Application: advertising graphics, shop windows, glass city and private transport and other transparent surfaces.

Manufacture: Germany.


White perforated PVC film for printing bright window advertising graphics. The proportion of the printed surface of the film 3676E is 60% when the diameter of perforation holes of 1.5 mm, which allows you to print clear images with fine details.

Perforated film is used for applying advertising graphics on a smooth glass surface (advertising on transport, advertising on the Windows and the shop Windows). The printed image is visible only from the outside, from the room side black reverse side of the perforation remains visually permeable.

Self-adhesive film designed for wide format solvent printing and latex inks. Suitable for indoor as well as short and medium-term outdoor use in conjunction with protective laminate.


Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The ideal temperature for installation of self-adhesive film of 20-22°C. the Decal film can be carried out only in dry condition!

To protect the perforation from the accumulation of moisture and ensure longer service life of the film is recommended to laminate the finished print.