Self adhesive print film with a removable adhesive 3628

 

Specifications

Basis: PVC.

Thickness: 80 µm.

Type of substrate: silicone paper coated on one side coated, 135 g/m².

Type of glue: polyacrylate adhesive, removable.

Gluing temperature: +10°C.

Roll width: 137 cm.

Roll length: 50 m.

Surface: transparent, white, glossy.

Printing: solvent, latex, UV inks.

Application: decoration of walls and interior design.

Service life: 2 years.

Manufacture: Germany.

Application

White or transparent plastic is very glossy PVC film for decorating interior walls with removable adhesive. Film tight to wall surfaces and is easily removable type of adhesive. After use is removed from the surface of walls, without leaving traces. Adhesive tape is used to design and print promotional graphics (advertising on the walls in the areas of sales, design of trading floors). Easily removable film designed for wide format solvent printing, and UV printing and latex inks. Suitable for indoor use.

Use

Digital print on self-adhesive film, it is recommended to use cotton gloves, to avoid contamination of the surface of the printed material. Before printing it is also recommended to make a test print of the file with profiling (the settings of the printing equipment and software for printing on a particular type of material).

After printing self-adhesive film with a ready image needs to be left in the expanded position on a flat, clean and dry the vertical surface to complete the ink is dry (recommended 24 hours). The ideal temperature for installation of self-adhesive film of 20-22°C. After use, the film is easily removed from wall surfaces without leaving residue.

To ensure a longer service life of the film is recommended to laminate the finished print. Lamination allows to give the image a glossy sheen, and to preserve color depth and to protect the product from moisture and damage, greatly prolonging its service life.

Close